Steve P ,
I think you are right on both counts.
I am not aware of any 1.4 litre 340 cars here in Australia only the 360 .
Do you have one of these available?
Search found 14 matches
- 27 Mar 2024 09:57 pm
- Forum: Volvo 300 series: demand
- Topic: Final Drive Gears
- Replies: 2
- Views: 408
- 27 Feb 2024 10:53 am
- Forum: Volvo 300 series: demand
- Topic: Final Drive Gears
- Replies: 2
- Views: 408
Final Drive Gears
I have a M47R 5 speed transaxle with 3.64:1 differential gears.
I am looking for a 3.82:1 gear set (new or second hand) to fit my diff housing. According to the manual my diff housing is a MT5 type housing.
What's out there folks?
I am looking for a 3.82:1 gear set (new or second hand) to fit my diff housing. According to the manual my diff housing is a MT5 type housing.
What's out there folks?
- 05 Aug 2023 04:30 am
- Forum: Volvo 300 series: demand
- Topic: 360GLT 1st gear
- Replies: 0
- Views: 15843
360GLT 1st gear
As the subject title suggests , I am looking for a new or good second-hand 1st gear for a 360GLT transaxle together with the synchro hub.
This gear has 34 teeth and incorporates a bush configuration rather than a bearing.
What's out there?
This gear has 34 teeth and incorporates a bush configuration rather than a bearing.
What's out there?
- 01 Feb 2020 11:32 pm
- Forum: Volvo 300 series: demand
- Topic: Transaxle 5th Gear
- Replies: 0
- Views: 18664
Transaxle 5th Gear
I need a replacement 5th gear or over drive gear for my 360 GLT /M47 transaxle Has 21 teeth. Is the gear fitted to the mainshaft. Anyone have one of these that is surplus to needs? Also looking for any of the various shims used within this gearbox if you have a collection of these a spare set would ...
- 26 Nov 2016 11:45 pm
- Forum: Engine, transmission, manual gearbox, variomatic
- Topic: Transaxle
- Replies: 5
- Views: 5992
Re: Transaxle
Thanks to those who have take the time to reply. It appears I will need to investigate this and see what it is about. That said there is the need for some gaskets to reassemble the transaxle. I see that they are still available but note there is some duplication. For example the transmission to clut...
- 13 Nov 2016 07:21 am
- Forum: Engine, transmission, manual gearbox, variomatic
- Topic: Transaxle
- Replies: 5
- Views: 5992
Transaxle
I am at present cleaning up a transaxle from a 360 GLT I picked up recently. Before I start throwing too much solvent etc about I am curious to know what the little rectangle shaped orifice is on the side of the overdrive housing. See picture below. http://imagizer.imageshack.us/v2/800x600q90/921/a4...
- 18 Jul 2014 02:39 am
- Forum: Engine, transmission, manual gearbox, variomatic
- Topic: 360GLT Transaxle
- Replies: 13
- Views: 12894
Re: 360GLT Transaxle
Hi folks . Its been a few years since I originally posted here. I can say that the car is now done and I have been running in the local hillclimb over the last year . The transmission has been fine however the ratios are a bit wide. I think I will go to a 14" rim with a 60 series tyre to compensate....
- 03 Apr 2009 12:47 am
- Forum: #Woohoo! Less and less topics to classify, +/-3000 :-)#
- Topic: 360 GLT Transaxle oil
- Replies: 4
- Views: 4587
Re: 360 GLT Transaxle oil
Thanks guys . Questions answered.
- 27 Mar 2009 12:43 am
- Forum: #Woohoo! Less and less topics to classify, +/-3000 :-)#
- Topic: 360 GLT Transaxle oil
- Replies: 4
- Views: 4587
360 GLT Transaxle oil
What Oil is used in this transaxle? I drained mine the other day and it appears to be red like auto trans fluid.
Also is this same oil used in the diff or do they use different oils. Still learning about these units.
I like using Castrol so does any one have the spec for this.
Cheers,
Fred
Also is this same oil used in the diff or do they use different oils. Still learning about these units.
I like using Castrol so does any one have the spec for this.
Cheers,
Fred
- 27 Sep 2007 03:33 am
- Forum: Engine, transmission, manual gearbox, variomatic
- Topic: 360GLT Transaxle
- Replies: 13
- Views: 12894
360GLT Transaxle
Fuse,
Thanks for the advice. It seems to me a simple case of pressing on and exercising due respect for the diff and the combination should work reasonably well.
Cheers.
Thanks for the advice. It seems to me a simple case of pressing on and exercising due respect for the diff and the combination should work reasonably well.
Cheers.
- 26 Sep 2007 12:14 am
- Forum: Engine, transmission, manual gearbox, variomatic
- Topic: 360GLT Transaxle
- Replies: 13
- Views: 12894
360GLT Transaxle
The car is actually a replica of a Kurtis Kraft midget that was built in large numbers just after WWII by Frank Kurtis in the USA. Usually fitted with a 4cyl. Offenhauser of about 100 c.i. or a sidevalve Ford V8-60 of about 138 c.i. Other engines have been used over the years including the little 2....
- 25 Sep 2007 01:23 am
- Forum: Engine, transmission, manual gearbox, variomatic
- Topic: 360GLT Transaxle
- Replies: 13
- Views: 12894
James, Thanks for the further advice . I was going to add that these engines put out 155ft/lbs. of torque @ 3000 RPM in standard configuration. That is likely to be higher with the mods to the engine but I doubt it would be any higher than 200ft/lbs. These are a relatively short stroke engine. I wou...
- 25 Sep 2007 12:05 am
- Forum: Engine, transmission, manual gearbox, variomatic
- Topic: 360GLT Transaxle
- Replies: 13
- Views: 12894
360GLT Transaxle
Foggy, Thanks for the advice. I guess the simplest way is to let you have a look at what Iam building. The engine is a 2.5 Litre Daimler V8. The rear wheel size is 13x7 . Will likely run a 205 / 60 series tyre. Not huge tyres by any stretch and the car is intened to have multiple uses; hillclimbing,...
- 23 Sep 2007 12:39 pm
- Forum: Engine, transmission, manual gearbox, variomatic
- Topic: 360GLT Transaxle
- Replies: 13
- Views: 12894
360GLT Transaxle
Hi all, I'm a newbie to this site. I am using a 360 GLT transaxle in an off road vehicle I am presently constructing. I aim to put a 2.5 litre engine in front of it with about 200bhp perhaps a little more when sorted. All up weight should be around 500kg. Volvo engineering is renowned as very good ....