Okay, so postage will be - depending on weight - for example +-20lbs for 30 quid. EVOMAN : Im not sure, if I understand what Front strut means (is it this ? http://www.rallydesign.co.uk/images/RD717product.jpg ) - I can send you everything on the car, cause im Disassembling it. THEO2468 :Im not sure...

I will let you know, when I find out how much it the postage to GB.

Springs are as old as shocks.

What are your offers ? My idea is something about 170Ł + postage.. And i also have front springs (160lbs/1inch) and 2 inches lower, if somebody interested.. Ill let them go for 30Ł+ postage. Im breaking my car to the bits, and this are only valuable things from it .. When I get them out, i can post ...

Anybody interested in Front and Rear Spax shocks ? Around 10k miles on them.

I am thinking of modifying BMW E30 prop shaft - It could work, i think.
The bigger problem will be changing the gear ratio - I know, it will be enough change the ratio on the rear (diff) - is there a question if somebody did it before ? ... Why think out of something, which is invented

It depends on how much you tune it
I think from 200 to 300 Nm.

There will be problem with prop shaft - the original one wont hold that torque, and with the speed - i have 1.9 N/A diesel in 340 and max speed is 140km/h(GPS) while engine has nearly 5000rpm car is not for highway use -and the fuel consumption in that speed is very similar to petrol engines.

Car is unlowered, but iI am thinking to put it 2inches lower ...

Hi, anyone have spare left and right silent-blocks for 1.6D or 1.7l bellhousing ?

I broke them both =(

Does anybody do it before ? ( i mean the redrilling )

Hi, its possible to fit FORD wheels on 340 ? I founde lovely "like mini-lites looking" wheels, but they are 4x108.

http://aukro.cz/item597722711_alu_255x45.html

Hi,
what shock absorbers are you using on the front ? and could you sent me a link, please ?
In CZE are only available some oil AL-KO, and oil Sachs..

my car is 340 (1.6D - > 1.9D) (turbo awaiting )

Hi,
can anyone post here a photos of rear speakers in original location ?
And dimensions of them ?

thx.

There is problem with masterbrakecylinder - cause my car is left hand drive, and there is a collision with inlet manifold. I try to use different brake cylinder, but in its to weak ( I think that inside is small amount of brake fluid - its not enough to press pistons in brake caliper to hard , when ...

Thanks a lot. I am glad to hear you enjoy it. In addition i must say, that its a low-cost racer, averything together costs around 800GBP. The rollcage is from Toyota Cellica - it was assamblaged rollcage, so i can put it inside and there I weld it. About the racing usage: I thought, it would be bett...