Sounds like a lot of work , but nothing me, my brother-in-law, and few beers can't handle

I was told that the transmition is dead by the owner.

Arek.

Hi,

I found a 340 with a perfect rust free body but the engine and transmition is is dead. I was wondering if it's easy to swap the 1.7 engine and transmition from my 340? Are the engine mounts the same or there has to be some modifications done? What else should I swap from the old one to make it ...

The driveshaft I found was on something like ebay, the guy said that it was from his 343 diesel automatic. I haven't seen an automatic diesel either. Anyway looking at how weak the engine is and how slow the car is with manual transmition it must be like a turtle with automatic

Hi,
My 340 has a driveshaft which needs to be replaced soon. I found a used one really cheap but it's from a 340 with automatic transmition and diesel engine. Can anyone tell me if it will work with mine 340 if it has manual transmition and 1.7 engine?

Arek.

thx for the suggestions. I went to the mechanic and it was the choke throttle control.

thx again
Arek.

Hi,
I have a small problem with the revs on my 340. When the engine is cold the revs are about 500 and when I drive and press the clutch they tend to fall really low and the car starts to shake because the engine doesn't work steadily on such low revs, sometimes the engine dies. When the engine ...

If u could, that would be great

What is the model name and number for the weber carb?

Hi,
I'm having more and more problems with my carb and I would like to know if carbs from ather cars like renault 19, volvo 440 etc. would fit mine 340. If not what should be done to make it fit?

Arek.

I got my car back today and it runs great now. The mechanic changed the carb seal and all the filters also he adjusted the carb. From what he told me the carb was set to almost max and it was basically flodding the engine with fuel, but that's the previous owners fault who never adjusted it. He also ...

I went to the mechanic on saturday, he said that the shaking of the engine and vibrations in bedals were caused by the exhaust system which was loose, as for the engine rpms going up and down on idle is that the carb seal has to be changed, he found some other minor problems with the car but it ...

Thx for the advise, lately it's been snowing a lot and my car was under a ton of snow, now the snow is almost gone so this weekend i'll check all u suggested and let u know.

Btw. somewhere on the internet I found some documentation with volvo 3xx series specifications, I'll try to find it again ...

kool, thx for the info i'm gonna look 4 some this weekend

Hello,
I'm looking for steel rims for my 340 and I would like to know if the rims from 4xx series will fit and are there any other cars which rims I can use?

Arek