Just quoting some basic stuff from Haynes Fueltank: 57 Litres Motoroil: 4.5 Liter Weight with driver (B200) 1100Kg Cooling system liquid (B200): 7 Liter Ask anything and i'll check if there's in Haynes. And by the way, dont use the scissor jack when lifting up the car to change wheels, and don't use...

I have that key also. But lamp is broken. I was thinking putting a LED there but LEDs are often 1.6V or higher and battery on mine is ~1.4V so it doesn't work. =/

Took a photo of the electric diagram of the blinking section. http://upl.silentwhisper.net/uplfolders/upload7/blink.jpg Seems like when ignition is on, the relay is giving pulses contantly, and when you close the circuit with the switch the pulse reaches the lamps. And when the warning-lights switch...

Hehe well smelling at the oil stick it definitivetly smells gas. I'll take it to the mech on monday. I'll update then

Ok thanks for all answers! This was a bit too complicated for me (i'm a real noob when it comes to engines) so i took it to the car mechanic, and he said eitherwise there is gasoline in the oil that has leaked from the choke and if this was he said i shall change oil, if not he'll just drop some oil.

Guess i could do that

There is with no doubt locks engines for 360 here in Sweden so it would be cheaper to order one from another scrapyard, but if it is the same motor to e.g 740 it would be most cheap 'caus they have it here on the local yard. But i dont know if is like that :S

Thanks for the replies. I have checked it several times both with cold and hot engine and it seems that theres too much oil in it anyway. The weird thing is that the last owner said he had changed the oil and oil filter recently. Obviously he must have got the wrong info about the oil volyme. Since ...

The electrical engine for the central lock is broken on the right back door on my 360 -88. Yesterday i finally took it down to replace it but it seems it's not very easy to get hold of one of theese. The local scrapyard didn't have any either. So i wonder if it's possible that it could work with a m...

Hey, when i checked the oil today i discovered something intresting. The oil was over a centimeter over the maximum line. Thats about 1 litre too much oil in the system i think. Is this serious? Should i remove some oil, and if, what kind of tool do i use to get the oil plug off under the motor? (it...

Ok here's the pictures. No wonder this didn't work....

Ok, i deleted the textile boarder under the steering wheel and there was a few relays but with little help from Haynes service book i could find the right colors of the wires that went to the fan relay. I took it off and one of the connector had got very rusted and corroded. Measuring with an ohm me...

Hey welcome i'm also from Sweden!! Great forum btw

I have a 360 GL -88 with B200F engine. Its gasoline injenction, catalysator and lamda sond also. I dont know any more about the differences though

Aha sounds very intresting! Sorry i've havent posted for a while, been busy. I finally got on my extra lights now also

I should take a look at this as soon as possible. Thanks!