Hi guys need a 360 bellhousing for a project Im building for my girlfriend. Found a crack on the one I had bought (nightmare) and it’s warped while being welded up so it no longer clears the flywheel

Thanks
Dave

A few bits have been done recently, painstaking straightened the lips on the sills as a previous owner at some point smashed it up a curb, but I have also built up my struts which now look amazing! http://i1057.photobucket.com/albums/t383/GulfPetrolHead/12434153_1224860400877390_668954854_n_zpssmick...

jakz17 wrote:What's your tire size?

All sorts of tyre sizes for the rear as they will be ruined from drifting and I haven't decided on a front size as I will need to see how the wheels fit under the arches, before I can decide width and profile. Diameter is 13" on all these badboys.

now sold

Late '88 Volvo 360GLE saloon, 2.0 Carb model She's a bit of a survivor car so to speak with 197,830ish miles on her, some good orginal features and some tasteful aftermarket aditions. Good stuff: -Lovely good condition cream interior which is a genuinely nice place to be with electric windows and he...

I finally plucked up the courage to cut out the rust on my inner wing

Hoping to trim the replacement panel from my old 360 down to size and have it welded in either this weekend or next

That is some great work so far, keep it up :) Will you be runnjng injection if so itb's? Or carbs? You're almost as much of a wheel whore as me lol The plan is to do a different engine swap to the norm and run it on my YZF1000 Mikuni carbs, but if that all goes pair shaped I have a B230FK sitting h...

So... Theres a few new bits and peices that have been done. Firstly I took back the front brake calipers and carriers and gave them a lick of paint http://i1057.photobucket.com/albums/t383/GulfPetrolHead/2015-09-19%2013.15.48_zpswrnxg4yk.jpg Then I got to work painting the rear half pf the floorpan ...

I did some research the other day and it seems that sierra standard calipers and discs should fit under 13"s so hopefully these will work... Would I be able to purchase a pair of the laser cut carriers/mounts off of you mate?

Lots of nasty jobs recently, fully degreased and sanded the floor pan and stonechipped the rear half of the floorpan. http://i1057.photobucket.com/albums/t383/GulfPetrolHead/2015-08-19%2018.48.17_zpsqyypmher.jpg Then I went about drilling the topmounts out to allow me to fit Nissan S13 topmounts htt...

So today I decided to clean up the front panel of the car and give it some paint, I had already removed the rust with a wire wheel, kurust treated the areas and then zinc primered them. Today they recieved an even coat of regular primer and then red hammerite (not colour matched as this area is cove...

if you could get a picture of the grille I might be interested as I'd like to clarify if it is a mk2 or mk3 one

would this kit fit under 13" wheels do you happen to know?

A lot has happened since the last update... Since then I have started to break my old daily 360GLT to get the majority of drivetrain and rear suspension assembly out, the plan has changed a bit too... The car is bassically a bare shell now and I believe I have found all of the rust it was hiding, no...

I have a 340 one for sure if you can't get hold of 360 one