Hi.

I tried to search, but could not find definitively how front door handle is removed? Is there any guide with pictures?

So changed timing belt, oil, spark plugs and diff and gearbox oil.

And discovered new problem. Radiator leaks on two places on top half.

Where could I get working radiator? used one could be ok, just that it does not leak.

Cas is manual and has no AC.

Sorry to post on old thread, but I believe I have the same problem. 1990 Volvo 360 and very hard to shift to second. You have to really push lever to left and then down and it still takes a lot force. I read here that there is a bracket that needs welding? Any images on how to do that? I do not own ...

Proud new owner of 360 here. B200 E/F ( what does that mean? I know B200 E and B200F) Got it from first owners son, 178 000 km. And already problems: The odometer and trip just stopped working on test drive. Confirmed working on test drive, but suddenly they just stopped rotating? How hard is it to ...

Last update hopefully. After trying everything ( found 3 used renix units and 1 crankshaft sensor in the boot) I opened the fuel tank. The filter on bottom of the fuel suction line seemed fine until I tried to run water through it. It barely got out, took like 30 seconds for water to drop at half le...

Update again. So with macs help, i got the replacement parts for the carburettor. Parts from DAAZ Solex did fit the carb. Now it has new float, float valve and diaphgrams. Unfortunately it did not help. Same problem occurs. But now the carb has petrol in it, it is confirmed. Could this be a ignition...

Update on the situation. The carb base has now been machined to be ass straight as possible. The intake manifold had warping less than 2 hundreds of millimeter, so that does not need straightening. My mate put the thing together and...same problem. Now it does not change rpm when spraying with water...

So my mechanic change carb seal, intake seal, new ignition parts, and all oils. But after engine warms up, it starts to cut out :(. He made a video of the problem: https://youtu.be/lA_QDhMAarQ So waht to do now, any thoughts? Is the intake/exhaust manifold completely gone? And if so, any1 here have ...

So my mechanic has now assessed the situation. carb base is warped 0.5 mm. Is it still salvageable? he recommended putting some sealant on the base, and new gasket ( sealant which lasts in hot and oily/gasoline environment). Also intake/exhaust gasket was finished. He will also change motor, transmi...

I have a little same problem: So I bought a -86 good conditioned 343 with 1.7 engine, 5 speed gearbox. Has 150 000 km on clock. It had nice idle and all, no splutters. Hard to start though when warm, seems to not get petrol. But it has new petrol pump fitted last summer. But after I bought it, 500 m...