It fits almost perfectly, but becouse of use bolts instead screws, you must experiment with distance form headlight (in practice it's reduce to find suitable place for one 'distance' nut and then screw all with second nut).

Hi,
Here is my another project:

White indicators from Opel Kadett E (brand new, 4£ for both - left and right side), tube of glue (1.5£), bolts (20 pence), some plastic chunks and black spray (free).

Thanks :) But that's one and only prototype :) Why? Well, when I was in a half way doing this I saw some snow caps which prefectly (well, they need some work to join it with hood) fits for 3xx. And they are cheap too. They are an extra parts for Skoda Felicia (cat. no 323 - cca 11 or 14£ (for new ty...

I built it because when rains, water gets inside car through blower fan (at driver mat through foot ventilation). That's all
All stages of construction and final appearance shown at image (~1.3MB)
Totally cost: 4£

Nice work! I like the wheels too.. have you sprayed them? Thanks :) Yes, wheels were sprayed with three coats of black 'shine' spray, then three of silver at the edge and at last five coats of colourless paint. I made this becouse I couldn't find this rings (tip: VW has them to :) , but that parts ...

Well, work in progress (currently stopped becouse we have here beautiful spring and since yesterday is snowing :lol: ). Shortly - one spoiler from VW Golf MkII, six angles, twelve bolts and few hours of free time. http://img299.imageshack.us/img299/6329/0053na.th.jpg http://img119.imageshack.us/img1...

I have seen some VW's in the street... maybe the Golf II front spoiler fits ok(...) Yes, Golf MKII fits ok. Today, at local scrap yard I digged through tons of bumpers and spoilers. There is no need to cut or adjust anything. We need only few angles and bolts to join spoiler with bottom of the fact...

Witam krajana

Yeah :roll: , but why in Haynes is only that: -> http://img234.imageshack.us/img234/5840/c4zl.jpg (red marked) They forgot to write about other models or do this on pupose :? And that caption: 'B14 models with automatic transmission'. For me it looks like they forgot to run the rest of diagrams fo c...

Yes, I know where that relay should be mounted by factory (I found it in this topic ). But all seems that relay wasn't mounted in my car ever (there aren't any wires coming out from the factory wiring). Haynes isn't saying anything about that module, only this was mounted together with renix ignitio...

Well, there is another problem with my '89 1.4. I want to install gear change indicator and indicator for idle solenoid (when close, I use relay switching led to be on when solenoid is closed). Problem is, that led connected to renix is still shining and idle solenoid is still on (it has to be off w...

Private messaging is unfortunately disabled
My E-mail: globetrotterxl@wp.pl , mail message may have only 10MB.

Probably this weekend I start to disassembling damaged parts and about wednesday car is going for chassis measuring, so I would be greatful for any drawings or infos

Hello
My Volvo had a little traffic accident and now I'm looking for chassis dimensions (something as like published in autodata catalogue) to check that the chassis is ok (I hope ). Could anyone help me with that?
Thanks

Can anybody tell me what is the full name of that alloys. They are similar to Virgo from Volvo 2xx but nobody could tell me exact name yet. Only thing I found about it is that they were installed on Volvo 480 Galaxy ( http://home.swipnet.se/~w-91955/indexeng3.htm ), Volvo 360 GLT and that they are m...