Now I saw that the seller says 1986, yeah sure ! sm6 On the other hand, last Saturday I went "visiting" this one: http://mercador.ro/oferta/piese-volvo-340-ID1l3E5.html#7adf0ccb40 I bought front door rubber seals, a lot of stuff made from plastic from the interior (door trims, seats adjusters), righ...

Non-spoted, they are for sale:

http://mercador.ro/oferta/volvo-340-ID1 ... 7adf0ccb40
and
http://mercador.ro/oferta/volvo-340-cu- ... 7adf0ccb40

Usually I buy various bits and bobs from UNIX, in my country the site is: http://www.unixauto.ro/Unix_Browser_Form.aspx .
The company is from Hungary, and they have selling points all across east side of Europe.

Welcome back !

Sorted! Done ! :D Once again, my car proved me that I`m stupid. Why? Well, about a month ago I`ve tried to start the engine in a cold morning directly on lpg. Cold engine, moisture in air-> missfire in the intake -> blown airfilter and a big split on the plastic tube that connects the air filter cas...

Hi, the rotor arm was replaced two years ago, and the dizzy cap a month ago. I forgot to tell you that i have no missfires, i have no oil in coolant bottle. I`ll have a look at the cranck sensor, i 100% believe that my problem is a electrical one. But why it runs perfect only when is cold, no shakes...

So, starting three weeks aho, my engine begun to run like crap. Meaning the idle would sit at 600 rpm, poor "take off" at the green light and so on. One night I found that all of my HT leads were glowing in the dark. Ok, out with the Bosch, in with the Beru. Today i have changed the spark plugs, fit...

Hi Tom, on my 1986 GLT b200e I have mounted the starter from my ex b19. It`s a perfect fit, althought the b19 one is smaller.

Thanks a lot, i`ll give it a try.

sorry, who is RJ? I can`t identify him, I presume is one of the forum users, right?

Question: I have a friend who works in Amsterdam, and I asked him to buy a speedo cable for my 360. But he wants to know from where, and I can`t find a site form NL. Can you guys give me a clue?
Thanks.

volvodspec wrote:
prime suspect is the rear jacking point being able to touch the leafspring, that happens quite often.

+ 1, it happened to me on the left side, but I had a horrible squeak on poor roads.

Well, the distributor cap had a small crack on it, I removed it/ fitted a new one. And after that I moved the body of distributor slightly to the left and it seems to work ok.
Thaks again.

Ok, i`ll give it a try the way you mentioned it. Thanks !

Good day. I need to know how the distributor on a b200e engine should sit on the engine block, between it`s "ears". I mean I know it has not a precise (standard) position from one engine to another, but it should be orientated slighty to the left or right? At low reevs and under load I can hear tiny...