http://img692.imageshack.us/img692/3111/img4863s.jpg Uploaded with ImageShack.us http://img600.imageshack.us/img600/3774/img4864w.jpg Uploaded with ImageShack.us http://img824.imageshack.us/img824/6156/img4865qj.jpg Uploaded with ImageShack.us Today i had a full day,but i took some pics in order to...

Thank you Chris! Are you sure 100 %?
Is it possible to mount the ignition sensor from the clutch bellhousing the wrong way? Now the wires go toward the back of the car, is it ok?
Seems like tomorrow is gonna be a good day, for science.

Or you can try this- pull it out with wet paper:

http://www.youtube.com/watch?v=1xuR7T8G1Ys

Hi guys. After almost a year, i managed to pull togheter all the bits and pieces and rebuild my b200 e engine. I dropped in new piston rings, rod bearing shells, gaskets, valve stem. Ok, but i`ve made a mistake: i forgot to mark each injector jack when i took them off. Now, obviously it won`t start....

Hi, look under the oil filter- left side i think , on the block there is a spot where it`s embossed the engine type.

Hi all, I have a question regarding that wire that runs through the spring inside the oil scrapper ring: http://img21.imageshack.us/img21/4976/img4088x.jpg Uploaded with ImageShack.us On a new set of piston rings that wire doesn`t exist, is it ok to put them on the pistons like that? http://img163.i...

http://img811.imageshack.us/img811/1260/hgdhsf.png Uploaded with ImageShack.us http://img847.imageshack.us/img847/6420/ighvhiv.png Uploaded with ImageShack.us this one is off-topic but it`s for trabitom: http://img855.imageshack.us/img855/9638/ok8419.jpg Uploaded with ImageShack.us http://img546.im...

Try have a look at this, it doesn`t say a word about LSD

http://www.volvo-club.ro/topic/2398-vol ... ekt-turbo/ -google translate

ps: the car is a sister of Duvel78`s "'88 360 GLT Millionaire - leather, aircon, PAS, EW, EM"

Howdy Adrian!
Tom, i marked on the map the location of Adrian (i marked the "county" if i may say so). And my location also- Bucuresti.



Uploaded with ImageShack.us

Hi, look underneath the exhaust manifold, behind the alternator.

Here`s mine:




Uploaded with ImageShack.us

Personally i use 5.1 from OMV and it`s ok.

Thanks for your replies. In the end, i decided to leave it stock (lack of money, fear I might broke something). I also thought i might use the pistons from the B19, but they are taller, and the rod seems shorter. So, not this time. Btw, on the B19 on all the valves is written VOLVO, on the B200 the ...

Hi,...me? Sorry for OT, is there another user registred alf on the site? Because i don`t know nothing.

It`s me again! I found a set of Goetze rings sm4 . I want to know, it`s okay to shave the head-off by 0.20 mm, in order to increase the compression ratio? http://img213.imageshack.us/img213/7299/img9985b.jpg Uploaded with ImageShack.us http://img502.imageshack.us/img502/8440/img9986n.jpg Uploaded wi...