My mothers car has clear windows and I feel that it is way too hot to be used for trips in sunny days, sun burns everything inside :( But in my gl I have nice green windows and it is very rare that it would be way too hot. Even if car has been in sun many hours and I start to drive it cools down rea...

zimba posted pics to finnish forum from his new installed dials, printed on heavy paper with inkjet. --- http://www.students.oamk.fi/~kimita00/Simpalle/2004_07_29/103_0383.JPG He says that hardest part was getting rpm and speedo needles to correct position :) Also illumination works ok trough of pap...

This year I have seen in Finland 360 with prize tag of 3000 euros, it had new paint and b230 engine, but still price is too high, imo.
Many 360s are around 1500-2000 euros. Then there is of course cheaper too, but usually not ok shape

In DK cars are even more expensive than in Finland, so I think it could be true if car is in top shape.

I have fitted generic silencer. I cut old silencer out with metal saw and then welded with mig new one to replace it, I used old exhaust pipe part that goes over rear axle. Then I build also new attachment to rear part. Silencer I used was bit short so I welded also little more pipe to it. New silen...

I have very small problem. Engine coughs few times before starts accelerating if I floor accelerator quickly, but with very small amount of choke it does not do that, but it starts to boo then because not getting enough air. It does that coughing effect around 1000-4500rpm area. Other than that it r...

Blue anodised (is that a word?) aluminium cut in correct shape and made holes and then print white numbers on transparent film and put those together. I think it is best way to get S60R look a like dials, also illumination should be ok then. But it needs high level of metal work skills and equipment...

Maybe it is possible to make in blue too, I think that it is Paint Shop Pro used to paint those, but I'm lacking bit skills for that

zimba has supplied those black and red only.

Hello all. That car shown in new vids is that one in my avatar In that winter video I had webcam mounted on dash. In that acceleration is not best because of road has thin layer of ice, no grip and lot of wheelspin ;) In other video it is 1st lap ever I drove on that track, 1st lap always is warmup ...

215784km In last week 1200km and about 50km on race track. Saturday again to the track

In finnish volvo forum has topic about white dials for 360. One of members of finnish forum, zimba, has made them and I'm hosting .jpg files. I did come to think that perhaps here is interest for those also :) All copyrights and props go for zimba for scanning and painting them. http://www.janiervas...

Around 1,20 euros per litre in here, sorry that I don't know what it will be in pounds

Engines mounting rubber parts may be worn, also driveshafts rubber parts can be worn because first, that can eventually lead to braking of driveshaft from what I have heard.

First sorry of my english, I don't quite know all part names. I have rust in passenger door, actually I have hole in there too, surface metal has separated from bottom door, luckily it is not visible, yet :D I have had rust in a bottom cup of front springs (bottom of spring is kept at place with tha...

I did found Gas-a-just model that fits, not AGX that would been adjustable from that page, but is Gas-a-just adjustable too in rear?