Looks good, it will be getting flocked so I'm not overly fussed about any little nicks etc.. just as long as its not dented etc

Ben….

Nimminz wrote:I have an '88 Dash, not sure about all the vents / trims but if yours is the same ish year you can swap them over. £20 but really CBA with postage / couriers. I'm in Durham City, may be going down to the september meet though

Mines a '86. Not sure if they're different??

Ben

I'm after a dash for a 340, not to fussed about condition as its to be flocked. Located in Kent

Ben....
07985607419

Just wondering if anyone can help me out and show some pics of a hydro in some 340's and where a bouts you have mounted them.

Thanks, ben….

Thanks for the pics. Picked up a new float and weighed it and it was bang on 6 grams. Also put them in the water and it reacted exactly the same as in the pics

Ben….

So today I took my carb apart to troubleshoot and I first off measured the float height which came up as an odd reading (I had found the exact values in the engine spec in the green books section) and then I had heard about the common problem of the floats becoming pouros and absorbing fuel thus mak...

Bogging is one thing but to the extent that i cant go around a mini roundabout without it cutting out!

Ride_on wrote:Fit fuel injection, carbs never liked corners anyway

Thats alot of effort no?

Ben

Speedy88 wrote:You'll need to get new ones, what engine are you running? 1.7 in your signature?

Make sure the floats have sunk though, they should be buoyant in the chamber.

Yes it's a 1.7 and ill have a look at them tonight and see

Ben....

Speedy88 wrote:Sounds like carb floats, I had a similar problem although not quite this extreme on my 1.7. Yours could well be leaking and completely sunk, causing the float chamber to fill up with fuel and leak out.

What would you suggest?

So my cars developed a weird problem where when i turn right my car wants to cut out and boggs out. It smells like its over fuelling but i guess it could be loss of spark because there would be unburnt fuel? This happens when i go around a long corner or even around a small mini roundabout, the mini...

Thanks mate helps a lot i'll have a look

Ben….

Just wondering if anyone could tell me what the top slider is connected to as mine has stopped working and the air comes out of every vent and i cannot choose where it comes out, i.e windscreen, feet etc… The hot/cold slider works fine its just the blower position slider that does not. Any help? Tha...

Need a good condition drivers side (o/s) driveshaft and if possible if anyone has the hub flange which it bolts onto

Ben

Rough running b172k engine… Problems fixed throughout Had some engine problems on the 172k engine recently, started with some rough running, poor idling and cutting out. When i took the carb apart i found a return jet pipe fallen off in the float chamber, a cracked gasket on the bottom of the carb ...