fornt camber?

Various, various and more various!
Post Reply
samueljon
Posts: 341
Joined: 30 Jun 2010 02:07 pm

fornt camber?

Post by samueljon » 05 Oct 2010 09:00 am

been playing about in the car, had a good look over it at the weekend (still havnt done the reverse light as yet)

just wondering if it is pos to run front camber on the 340's and whats involved in doing so

Cheers
Sam

samueljon
Posts: 341
Joined: 30 Jun 2010 02:07 pm

Re: fornt camber?

Post by samueljon » 08 Oct 2010 08:44 am

anyone have an idea?

OppositeLock
Posts: 26
Joined: 19 Aug 2010 02:26 pm
Location: Melbourne, Australia

Re: fornt camber?

Post by OppositeLock » 08 Oct 2010 10:06 am

If you have access to a machine shop, it doesnt take too much to whip up some camber tops.

samueljon
Posts: 341
Joined: 30 Jun 2010 02:07 pm

Re: fornt camber?

Post by samueljon » 08 Oct 2010 12:14 pm

i used to but have finnished college now :(
only way to do it is custom then??

User avatar
L14MNP
Posts: 1340
Joined: 26 May 2010 09:15 pm
Location: Sunderland/Durham

Re: fornt camber?

Post by L14MNP » 08 Oct 2010 12:29 pm

I haven't paid much attention to the way you would adapt a 300 fror front camber (yet) but can you not just slot the holes in the strut tops?
STREETO WITHDRAWL
INTO BURNOUTSsince1982

samueljon
Posts: 341
Joined: 30 Jun 2010 02:07 pm

Re: fornt camber?

Post by samueljon » 08 Oct 2010 04:48 pm

how would you do that with out weaking the strut tops??

also is there anywhere that do strut braces for the 340 or again a custom one would have to be made?

mat_91
Posts: 636
Joined: 07 Oct 2009 08:50 pm
Location: nottinghamshire

Re: fornt camber?

Post by mat_91 » 08 Oct 2010 06:08 pm

custom strut tops would be the way to go but one question are you lowering it as you gain enough camber mine is currently running just over 1.3 degrees with a 75mm drop other than if your not lowering i wouldn't bother if you are lowering it id look at returning standard geometry to the suspension first
Image

User avatar
340GLT
*** V3M DONOR ***
Posts: 3657
Joined: 31 Mar 2005 09:01 pm
Location: Shropshire & Swansea, UK
Contact:

Re: fornt camber?

Post by 340GLT » 09 Oct 2010 12:01 am

Have a look in my build thread mine runs camber plates on the front.
Adam
F559 LFE - 340R 2.0 16v
C208 CTR - 340 1.8 16v
D300 LBO - 360 GLT 3 Door Turbo project!! (and restoration)
F706 RBX - 350R in process!!!

samueljon
Posts: 341
Joined: 30 Jun 2010 02:07 pm

Re: fornt camber?

Post by samueljon » 11 Oct 2010 08:40 am

ye its running slight camber but didnt think it was great, i suppose with a proper set up it will feel alot harder/ feel more

Post Reply