problem after problem

Various, various and more various!
Post Reply
RattyCoop
Posts: 61
Joined: 08 Sep 2010 03:20 pm

problem after problem

Post by RattyCoop » 04 Apr 2011 05:15 am

finally got the wheel bearing sorted and now the speedo has gave in. Its starting to get a little bit annoying lol. Im guessin and hoping if i change the cable it will sort it out

morgan105
Posts: 282
Joined: 30 Dec 2004 07:34 pm
Location: Wirral, UK

Re: problem after problem

Post by morgan105 » 04 Apr 2011 09:16 am

Make sure the cable is fitted in the wheel correctly and routed properly otherwise the speedo does stop working.

RattyCoop
Posts: 61
Joined: 08 Sep 2010 03:20 pm

Re: problem after problem

Post by RattyCoop » 04 Apr 2011 09:46 am

oh right so it might of just popped out when the bearing went. Makes sense now i think about it lol. I'll have a look. Thanks for that :)

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: problem after problem

Post by Ride_on » 05 Apr 2011 06:36 pm

Also make sure the circlip thats holds the end piece in the bearing cover cup is on. It will work without it but it may come out or not provide any drive for the cable, it may also wear out the square hole, again losing drive for the cable.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

MCHUDD
*** V3M DONOR ***
Posts: 2537
Joined: 18 May 2006 03:43 pm
Location: BELFAST UNITED KINGDOM

Re: problem after problem

Post by MCHUDD » 05 Apr 2011 08:57 pm

Hi mate.
If you are stuck for a cable, give me a shout.
Cheers Mark. sm4

Post Reply