wireing b230ft in 360
wireing b230ft in 360
god this is doing my head in can anyone help i got a b230ft in a 360 been try to get the thing to spark for 3 weeks or so now i am at my wits end has anyone done 1 that would know there way round the loom happy to pay if you can help me
Re: wireing b230ft in 360
you useing the loom out the 360 and adapting it or useing the loom that is for the lump?
-
- Posts: 1921
- Joined: 06 Dec 2008 09:35 pm
- Location: Netherlands.
- Contact:
Re: wireing b230ft in 360
from what engine bay.. 2 series LH2.4 is completely different loom than from a 7 or 9 series.
you say you're trying to get it to spark. what flywheel did you use? did you use the TDC sensor located just above the bellhousing; bolted to the B230FT engine etc.
you say you're trying to get it to spark. what flywheel did you use? did you use the TDC sensor located just above the bellhousing; bolted to the B230FT engine etc.
Re: wireing b230ft in 360
yes useing the right flywheel with the crank senor on the back of the block got power to the coil but still no spark
-
- Posts: 159
- Joined: 19 Feb 2009 11:55 pm
- Location: Rotherham
Re: wireing b230ft in 360
Hi Finn,
where are you from, if you put your location there maybe a member nearby who could give you a hand!
where are you from, if you put your location there maybe a member nearby who could give you a hand!
Re: wireing b230ft in 360
i am in covenrty westmidlands i have got it sparking but the injectors are not fireing so it wont start anyhelp would be great
Re: wireing b230ft in 360
its sparking and its got fuel but wen you turn it over it fire's as if the timeing is out back fireing and locking up i think the flywheel i use must be the wrong 1 can some 1 tell me if the flywheel in a b200ft 940 2.0 turbo 91 is non dulemass as there 1 at a scrap yard by me
-
- Posts: 1921
- Joined: 06 Dec 2008 09:35 pm
- Location: Netherlands.
- Contact:
Re: wireing b230ft in 360
leads in correct order?
have you mounted the flywheel correctly? it fits in multiple ways but the TDC marks have to be in the correct location
have you mounted the flywheel correctly? it fits in multiple ways but the TDC marks have to be in the correct location
Re: wireing b230ft in 360
yer the leads a right did not know it had to be fitted with the tdc marks i will take a look on the web and let you know many thanksvolvodspec wrote:leads in correct order?
have you mounted the flywheel correctly? it fits in multiple ways but the TDC marks have to be in the correct location
Re: wireing b230ft in 360
right got to the end of this problem seen wots up on turbobricks i just but the flywheel on i am such a tool lol
Re: wireing b230ft in 360
finn wrote:yer the leads a right did not know it had to be fitted with the tdc marks i will take a look on the web and let you know thanks for the info volvodspec top blokevolvodspec wrote:leads in correct order?
have you mounted the flywheel correctly? it fits in multiple ways but the TDC marks have to be in the correct location
-
- *** V3M DONOR ***
- Posts: 9361
- Joined: 29 Jan 2004 04:20 am
- Location: Nottingham, UK
Re: wireing b230ft in 360
Did you get it right in the end? The blank in the flywheel must be in the starter motor hole when the engine is at TDC.
cheers
James
cheers
James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
Re: wireing b230ft in 360
yer i did mate it running now. hopefully be on the road soon 3 or 4 weeks woz try to get it ready for retro car show mite still if i ant to busy at work