The panel of devices 340-360

Various, various and more various!
User avatar
antiekeradio
Posts: 697
Joined: 04 Jan 2004 10:53 am
Location: roosendaal - netherlands
Contact:

Post by antiekeradio » 16 May 2006 10:10 pm

i think the PCB wiring of the Smiths unit is not compatible with the VDO tachometer.

either V+, ground or signal are not coming through, thats for sure.

User avatar
foggyjames
*** V3M DONOR ***
Posts: 9361
Joined: 29 Jan 2004 04:20 am
Location: Nottingham, UK

Post by foggyjames » 16 May 2006 10:16 pm

Agreed, they're totally different. For a start, they connect to the housing differently.

cheers

James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...

User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Post by Chris_C » 16 May 2006 10:34 pm

But the tacho under the bonnet is a Smiths one isn't it?
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast

User avatar
foggyjames
*** V3M DONOR ***
Posts: 9361
Joined: 29 Jan 2004 04:20 am
Location: Nottingham, UK

Post by foggyjames » 16 May 2006 10:49 pm

Yes....I think Wouter might have been puffing the 'erb a little ;)

cheers

James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Tach troubles

Post by mac » 17 May 2006 09:24 am

Tacho in Omars pic is a Smiths unit so we know he's trying to fit the correct unit.

Omar, Forget the 'regulator' it has nothing to do with the tacho. It's actually called a 'Multi Function Unit' and controls the following:-

It provides a stabilised 10v+ supply for the fuel and coolant temperature gauges.
It provides 'flasher' relay function for the indicators.
It operates the low fuel and high coolant temp.warning lights.
The dash warning lamps operate through it.
It provides needle dampening for the fuel gauge.

They were known to be troublesome BUT it not your tacho problem.

If you have visible damage to the printed circuit that is a likely cause so correct that first (or by-pass the connections from the wiring at the plug direct to the tacho - don't connect direct to the accumulator - you need the 12v+ to be ignition controlled).

This should get it working in the cluster, but the start delay still worries me - that does rather sound like a problem in the unit itself (but you won't know unit it's all fitted in and working).

Good luck, Mac.

User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Post by Chris_C » 17 May 2006 12:37 pm

Thanks for the clear-up on that Multi function unit Mac, I had guessed it just provided a stable voltage supply to all the electrical gauges, so they didn't misread due to voltage changes. I didn't realise it provided the flasher function as well... something for me to look into on another project I'm working on.
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

M.F.U.

Post by mac » 17 May 2006 12:52 pm

Hi Chris,

Just to confirm - you only find an MFU on Smiths Instrument clusters. '86' on VDO units are much more conventional. (normal indicator relay etc.)

Mac.

User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Post by Chris_C » 17 May 2006 12:59 pm

:D Legend... those last few words have saved a very baffled looking Chris. It does work how I orginally thought... on my cars ;) This might explain Petavius' problem she has at the moment though!

Thanks again Mac, back to Omars problem!
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast

User avatar
Omar
Posts: 101
Joined: 13 Feb 2005 04:48 pm
Location: Russia Moscow city
Contact:

Post by Omar » 20 May 2006 08:01 pm

Thanks all for the help guys.
I have connected a tachometer.
At me it was not simple a signal with RENIX .а when I brought it a separate wire simply did not wait the moment of inclusion. The tachometer joins in 5 seconds after start-up of the motor and in panels of devices and when I separately connected it. From RENIX the plait from 4-5 wires departs including grey (pulse) here it has appeared cut off and two more what that brown wires with tips near to it from a plait leave. I have connected a wire to it and on a nut in.
:D :D
Crazy about V300 Series

User avatar
Sophie Dog
Posts: 2
Joined: 24 Jul 2017 06:21 am
Location: Malaysia

Re: The panel of devices 340-360

Post by Sophie Dog » 24 Jul 2017 06:48 am

I have owned a 360 GLE 1985 model for 12 years and it has run up 60,000 km on the clock.
Last week the tacho worked interminably and then on Friday the battery went flat, a first time.
I did notice the charge light and some of the other lights were not always light when starting.
I have the Haynes book for the car and find that even with a magnifying glass reading the wiring diagram is almost impossible.

Does anybody out there have a wiring diagram for this model with plug colour codes and identification.
The other issue I believe is the tracks on the instrument cluster have finally failed.
WP_20170722_004.jpg

benji1985
Posts: 503
Joined: 30 Oct 2015 06:58 pm
Location: Helston

Re: The panel of devices 340-360

Post by benji1985 » 24 Jul 2017 01:40 pm

Sophie Dog wrote:I have owned a 360 GLE 1985 model for 12 years and it has run up 60,000 km on the clock.
Last week the tacho worked interminably and then on Friday the battery went flat, a first time.
I did notice the charge light and some of the other lights were not always light when starting.
I have the Haynes book for the car and find that even with a magnifying glass reading the wiring diagram is almost impossible.

Does anybody out there have a wiring diagram for this model with plug colour codes and identification.
The other issue I believe is the tracks on the instrument cluster have finally failed.
WP_20170722_004.jpg
try this
http://www.volvo300mania.com/uk/forum/v ... m.php?f=36

User avatar
Sophie Dog
Posts: 2
Joined: 24 Jul 2017 06:21 am
Location: Malaysia

Re: The panel of devices 340-360

Post by Sophie Dog » 25 Jul 2017 10:54 am

Thanks for the link, it takes a while to get used to the site.
360GLE.jpg
Serial Number
360GLE.jpg (140.06 KiB) Viewed 8939 times

Post Reply