Chris' Rant about Volvo

Various, various and more various!
User avatar
MJ
*** V3M DONOR ***
Posts: 1933
Joined: 24 Feb 2005 10:32 pm
Location: Devon/Staffordshire, UK

Post by MJ » 01 Sep 2008 09:32 pm

Lets see some pics then, you know you want to show them off ;)
Image

User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Post by Chris_C » 02 Sep 2008 12:32 pm

Ok, this was my fix 4/5 months ago on the bottom hose, just a rubber elbow that I cut the long straight bits off of, then cut the orig hose, and replaced the perished bit. This ment I had 2 6" lengths of straight left over, that I kept for a rainy day. With a plastic joiner, and was going to replace the hose in sections as bits perished. I never posted up piccies of this one before, as the elbow replaced is hidden under alternator.

Image

Joiner next to oil filter
Image

So, Top hose that I did on Sat. Found out that a silicon corner bit costs the same as a rubber one, so meh, might as well. It feels a lot more sturdy, but I guess time will tell. Basically exactly the same as I did before, cut out the bit of perished hose, and as more perishes, I'll replace a bit at a time (else I'll become a poor Chris very quickly...) Trying to cut the rubber stuff straight isn't the easiest job, I've tried stanley knife, hacksaw and mitre box now. All do a fine job, and a bit of wiggles is taken up by the plasic joiny bits anyway. If I feel like going bling, I might get some ali joiners, but I'm worried about transmitting vibration to the rad tbh with the amount my engine shakes ;)

Image

Glad I kept those 6" bits from the rubber hose, forgot that the top hose needed a bit of extending at the stat housing end, will replace with silicon at some point, maybe... but works well enough.

Image

Image
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast

germ
*** V3M DONOR ***
Posts: 1222
Joined: 15 Nov 2006 08:14 pm
Location: Hitchin Herts England - South Of France - NI Ards

Post by germ » 04 Sep 2008 02:18 pm

Nice!

do you think its posible to get a whole set of hoses for the car? if so what kinda price would be incured?

User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Post by Chris_C » 04 Sep 2008 02:56 pm

You mean custom made correct sized without loads of joiners? Possible, but doubt anyone (well, Samco I guess) would take it on. To do the lot the way I've started you're looking at ~£50 per 1.7 rad hose (as they are huge).
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast

germ
*** V3M DONOR ***
Posts: 1222
Joined: 15 Nov 2006 08:14 pm
Location: Hitchin Herts England - South Of France - NI Ards

Post by germ » 05 Sep 2008 03:05 pm

:shock: gulp

doing stuff in stages is underated! you know samco (on demon tweeks) have universal hose, would that be any good? all my hoses are nackerd!

it seems everything has decided to decompose at the same time :roll:

User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Post by Chris_C » 06 Sep 2008 11:40 am

DT site is down for maintenance, but I don't trust the flexi universal stuff. Just do piece by piece like I am mate, they normally only perish in one place at a time ;)
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast

germ
*** V3M DONOR ***
Posts: 1222
Joined: 15 Nov 2006 08:14 pm
Location: Hitchin Herts England - South Of France - NI Ards

Post by germ » 06 Sep 2008 01:25 pm

Yea, but i have rather a big piece gone its the long fat one! its all saggy at either end and a big sag in the middle. i think we can all rely on volvo to not have the hoses.

(lol iwas wondering why your engine bay looked sooo big :oops:, no spare and airbox isnt there. doh)

iam going to try get some hose sorted in the next few days, get something done lol still need to fix the brakes!

Cheers

User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Post by Chris_C » 06 Sep 2008 05:09 pm

Take the airbox out to do the job, it's only 2 screws, a nut and a reusable cable tie! I just rested it on the airfilter then.
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast

Post Reply