Various, various and more various!
-
blackbox
- Posts: 81
- Joined: 03 Jul 2006 10:29 am
- Location: cairns north queensland Australia
Post
by blackbox » 02 Dec 2007 09:52 pm
As topic my 360 B19E fuel injected run ok but it idles with a strange miss its not like its just one cylinder tho it runs the dies for a second the keeps running so it idles at 900 rpm then goes down to 300 rpm what could it be any ideas
thanks guys
Last edited by
blackbox on 07 Dec 2007 06:22 am, edited 1 time in total.
1984 360glt B19 black
-
jarlidge
- Posts: 367
- Joined: 26 Jan 2006 11:45 pm
- Location: bridgwater, somerset
Post
by jarlidge » 02 Dec 2007 10:01 pm
hi
i had that on my 360 gle and that turned out to be a air leak in o the fuel line, i don't know if that could be the same on your glt.
-
blackbox
- Posts: 81
- Joined: 03 Jul 2006 10:29 am
- Location: cairns north queensland Australia
Post
by blackbox » 02 Dec 2007 10:40 pm
how did you find where it was
1984 360glt B19 black
-
jarlidge
- Posts: 367
- Joined: 26 Jan 2006 11:45 pm
- Location: bridgwater, somerset
Post
by jarlidge » 02 Dec 2007 11:23 pm
i had to check all my fuel lines and found that 1 was leaking. once i repaired it i never had any trouble.
-
blackbox
- Posts: 81
- Joined: 03 Jul 2006 10:29 am
- Location: cairns north queensland Australia
Post
by blackbox » 02 Dec 2007 11:37 pm
ok so i will look all the way down then thanks
1984 360glt B19 black
-
jarlidge
- Posts: 367
- Joined: 26 Jan 2006 11:45 pm
- Location: bridgwater, somerset
Post
by jarlidge » 02 Dec 2007 11:38 pm
its a chance it might be that, its worth a try.
-
blackbox
- Posts: 81
- Joined: 03 Jul 2006 10:29 am
- Location: cairns north queensland Australia
Post
by blackbox » 07 Dec 2007 06:27 am
thanks i took vacuum hose off fuel pressure regulator and fuel came out so put new reg on and fixed
so Thanks again
1984 360glt B19 black
-
jarlidge
- Posts: 367
- Joined: 26 Jan 2006 11:45 pm
- Location: bridgwater, somerset
Post
by jarlidge » 07 Dec 2007 06:59 am
hi
glad i could help!
cheers
jeff