360 GLT v GLE ANY DIFFERENCES?

Various, various and more various!
Post Reply
simo
Posts: 13
Joined: 13 Mar 2008 09:53 pm
Location: Birmingham, England, UK

360 GLT v GLE ANY DIFFERENCES?

Post by simo » 19 Mar 2008 05:35 am

Hi all,
Hi SteveP - (360 GLT PAS conversion possible? - Volvo Community)

Are there any differences engine wise between the 360 GLT and GLE model? Am i right in thinking they are exactly the same and all parts are interchangable?

Mine is the 360 GLT, i've never seen a 360 GLE close up before :shock: (V3M sin). As i understand this only represents the trim level, what are their differences in trim?

Cheers
Simon

User avatar
SteveP
*** V3M DONOR ***
Posts: 7933
Joined: 21 Sep 2004 12:45 pm
Location: Coventry, UK

Post by SteveP » 19 Mar 2008 10:07 am

Hi Simon,

There are a few differences, but essentially the GLE is a carbed 2 litre and the GLT is injection, the GLE also has a higher ratio final drive, different interior trim etc.

Were you thinking of a particular part that you want to change? Ie. the PAS system will be identical apart from the PAS fluid reservoir bracket.

Cheers,
Steve
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux

User avatar
jarlidge
Posts: 367
Joined: 26 Jan 2006 11:45 pm
Location: bridgwater, somerset

Post by jarlidge » 19 Mar 2008 10:10 am

hi

the main difference between a GLT and a GLE is. The GLT is a injection.

The trim is slightly different the GLT model has a better looking interior,

as it is charcoal with grey stripes through.

The other thing is GLT models have a rear spoiler, front skirt and alloy

wheel as stardard.

cheers

jeff

User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Post by Chris_C » 19 Mar 2008 10:55 am

GLE interior stays about 5 degrees cooler over the summer though as it's all light grey ;)

Steve's right, on the PAS side, the only difference is the bracket that holds the fluid pot onto the strut top.
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast

simo
Posts: 13
Joined: 13 Mar 2008 09:53 pm
Location: Birmingham, England, UK

Post by simo » 06 Apr 2008 04:29 am

SteveP - Were you thinking of a particular part that you want to change? Ie. the PAS system will be identical apart from the PAS fluid reservoir bracket.
I was hoping a GLE would be a potential donor car for all other parts aswell as the PAS lot. Was hoping they would be a straight swap over etc. So, a newer GLT would be the ideal really for the long term.

Yeah Chris you're right about the temp when the sun really beats down, that'll be the head lining radiating down, i ain't got no sun roof either! :shock:
1984 360 GLT - receiving a new lease of life

daffodil
Posts: 301
Joined: 21 Mar 2005 11:14 pm
Location: hitchin herts

Post by daffodil » 06 Apr 2008 03:00 pm

some of the mk2 gle had the b19 and were injection same running gear as the glt
power steering is a straight swap although you will need the lower column

User avatar
foggyjames
*** V3M DONOR ***
Posts: 9361
Joined: 29 Jan 2004 04:20 am
Location: Nottingham, UK

Post by foggyjames » 20 Apr 2008 09:43 pm

Yes indeed - there were "GLE Injection" models in both mk2 and mk3, too.

Mechanical parts should be almost identical besides the intake side of the engine and fuel system.

The chaps are quite right that the brackets for the PAS reservoirs are different. A random but potentially quite important detail!

cheers

James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...

Post Reply