And the project goes on

Various, various and more various!
Tourinki
Posts: 231
Joined: 30 Oct 2006 04:02 pm
Location: Lieksa, Finland

And the project goes on

Post by Tourinki » 05 Apr 2008 06:22 pm

I felt today a sudden urge to do something and here is the result
http://s265.photobucket.com/albums/ii20 ... /Projekti/

I think that someone had tinkered with my morning porrigde :lol:
I hope that the link works.
1999 Volvo S80 T6 Quiet long distance cruiser.
1990 Volvo 360 GLi Waiting inspiration.
1989 Toyota Land Cruiser For days when wellies aren't enough inside the car.
1987 Volvo 360 GLi Being restored.
1986 Volvo 740 Turbo Sold, but not forgotten.

kaos
Posts: 1298
Joined: 09 Jul 2007 10:34 pm
Location: Somerset

Post by kaos » 05 Apr 2008 06:42 pm

some one deserves a change of paint.....

:lol:
Image

Tourinki
Posts: 231
Joined: 30 Oct 2006 04:02 pm
Location: Lieksa, Finland

Post by Tourinki » 05 Apr 2008 08:28 pm

Car or the parts? :lol:

I think this was the cause of choice of color
Pic
1999 Volvo S80 T6 Quiet long distance cruiser.
1990 Volvo 360 GLi Waiting inspiration.
1989 Toyota Land Cruiser For days when wellies aren't enough inside the car.
1987 Volvo 360 GLi Being restored.
1986 Volvo 740 Turbo Sold, but not forgotten.

User avatar
Jason B
*** V3M DONOR ***
Posts: 909
Joined: 17 Jun 2007 09:18 pm
Location: Bridport, Dorset and Southampton

Post by Jason B » 05 Apr 2008 09:12 pm

cool, this is similar to what I have done - though mine can't be layed up for too long and don't want to flush brake fluid until I sort calipers so haven't dropped the crossmember.

Didn't find any rot in the lower spring cups then? my drivers side one was great, but the passenger side had a hole which will be welded tomorrow or monday.

Great work and keep us posted!
'89 360 GLE awaiting 2.3 power

classicswede
*** V3M DONOR ***
Posts: 5461
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Post by classicswede » 06 Apr 2008 11:07 am

If the spring cup on the sturt has started to go you sill best replacing the complete cup rather than patching as it will have gone thin and is likely to colapse
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image

User avatar
Jason B
*** V3M DONOR ***
Posts: 909
Joined: 17 Jun 2007 09:18 pm
Location: Bridport, Dorset and Southampton

Post by Jason B » 06 Apr 2008 12:20 pm

this I know, but no scrappy near me has a 300 (aside from possibly one but they'd charge £100 or something stupid) and as I need to go back to soton within the week I need to get the car back together, I know someone who will weld it for free and I thought I may as well get it fixed so I can drive it back. My plan is to get struts anyway and have them strengthened but I wanted to fit the monos and polybushes this week to see if there is a big difference in handling.
'89 360 GLE awaiting 2.3 power

classicswede
*** V3M DONOR ***
Posts: 5461
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Post by classicswede » 07 Apr 2008 01:16 pm

Its not a big difference its a massive difference! :lol:

You can buy new spring cups to weld on.
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image

User avatar
Jason B
*** V3M DONOR ***
Posts: 909
Joined: 17 Jun 2007 09:18 pm
Location: Bridport, Dorset and Southampton

Post by Jason B » 07 Apr 2008 06:11 pm

still offtopic, my car is now back on its wheels - dai, you are a jeenioouuss!

By some fluke the monos seem to really match the springs you made for carl and the car is very tidy through turns!! no play in wishbones any more and the radius arm bushes (not from you - read your pm in future!) have solved a lot of my tyre "knife edging" problem under full lock, as the tyres have a much bigger contact patch on turning in. My cornering speed is now much quicker :twisted:

Thanks :)

Back on topic....

p.s I shall be strengthening up some struts soon, but I'm sure the welding I had done will hold fine for now
'89 360 GLE awaiting 2.3 power

Tourinki
Posts: 231
Joined: 30 Oct 2006 04:02 pm
Location: Lieksa, Finland

Post by Tourinki » 09 Apr 2008 07:03 pm

Attention all units. Car last seen on its wheels over a year ago. Has been seen almost on its wheels again.
Image
Image
Image
Image
That temporary steering rack i made is rubbish. I have to figure out something else. Because i'm not sure that should i put a PAS rack in it or non-PAS rack. So for now something temporary is the way for me. Also there is some used parts in the front suspension and i have to take it apart again when i get new parts for it.

So the parts what i need next are:
Monotubes ( Dai, I'll send a pm to you.)
Adjustable rear shocks
Bigger front brakediscs (not sure yet from what car)
everything that is changeable in steering rack
new wheel bearings (bought but i thought that i install them next time when i have the hubs detached)
Solid strut tops ( no point fitting them because i haven't got decent shocks)

I have to get it out of the garage for a while. I have to convert my Granada to run on Megasquirt and the 740 has to be washed and polished properly before summer. And my garage isn't the most biggest in the world.
Image
Image
I think that Granada and 740 are bit of a squeeze to be able to shut the doors. And the aircompressor bought it for the bigger garage but only problem is that it is still on the drawing board. :lol:
1999 Volvo S80 T6 Quiet long distance cruiser.
1990 Volvo 360 GLi Waiting inspiration.
1989 Toyota Land Cruiser For days when wellies aren't enough inside the car.
1987 Volvo 360 GLi Being restored.
1986 Volvo 740 Turbo Sold, but not forgotten.

User avatar
Ronnie
*** V3M DONOR ***
Posts: 1401
Joined: 27 Oct 2005 03:23 am
Location: Inverness
Contact:

Post by Ronnie » 09 Apr 2008 08:09 pm

That looks great, looks like those components have been powder coated - not sure your steering rack will pass the MOT though :lol:
'85 360GLT Mk2 3 Door B19E - SOLD
'94 L400 Mitsubishi Delica LWB

http://www.filterfeeder.eu

Tourinki
Posts: 231
Joined: 30 Oct 2006 04:02 pm
Location: Lieksa, Finland

Post by Tourinki » 09 Apr 2008 08:29 pm

Parts are just spraypainted. No powdercoaters around here.
About the rack. I was thinking about paying the MOT man to let it have MOT :lol:
1999 Volvo S80 T6 Quiet long distance cruiser.
1990 Volvo 360 GLi Waiting inspiration.
1989 Toyota Land Cruiser For days when wellies aren't enough inside the car.
1987 Volvo 360 GLi Being restored.
1986 Volvo 740 Turbo Sold, but not forgotten.

classicswede
*** V3M DONOR ***
Posts: 5461
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Post by classicswede » 10 Apr 2008 12:44 pm

I like the orange paint. I also noticed you have used new bolts that finish the job off. I have you made sure they are the correct tensile strength?
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image

User avatar
griffo20022
Posts: 576
Joined: 01 Sep 2007 03:12 pm
Location: Wolverhampton, UK

Post by griffo20022 » 10 Apr 2008 04:34 pm

I've found some flourescent orange paint at work today like that and you've got me thinking heh heh!
'90 340 1.4 Vince!
'94 BMW 325i Saloon

Tourinki
Posts: 231
Joined: 30 Oct 2006 04:02 pm
Location: Lieksa, Finland

Post by Tourinki » 10 Apr 2008 05:46 pm

classicswede wrote:I like the orange paint. I also noticed you have used new bolts that finish the job off. I have you made sure they are the correct tensile strength?
To be honest i don't know maybe 8.8. What is the strength in the originals. Old ones are so rusty and covered with rustprotection stuff so i can't see it of them.
1999 Volvo S80 T6 Quiet long distance cruiser.
1990 Volvo 360 GLi Waiting inspiration.
1989 Toyota Land Cruiser For days when wellies aren't enough inside the car.
1987 Volvo 360 GLi Being restored.
1986 Volvo 740 Turbo Sold, but not forgotten.

classicswede
*** V3M DONOR ***
Posts: 5461
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Post by classicswede » 10 Apr 2008 08:23 pm

Not sure of original spec but I would make sure the replacments are 8.8's

Be warry of any new ones that are not marked
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image

Post Reply