koni adjustables help?!?!

Various, various and more various!
Post Reply
User avatar
kds19
Posts: 366
Joined: 09 Mar 2008 07:33 pm
Location: aberdeen, Scotland

koni adjustables help?!?!

Post by kds19 » 14 Feb 2010 12:49 am

i tried to adjust my rear koni adj dampers but i cant get the bump stop out its in there soild
anyone got any tips on how to remove them?
and anyone know how stiff they go??
cheers
kev
85 360 GLT drift beast
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."

User avatar
Ronnie
*** V3M DONOR ***
Posts: 1401
Joined: 27 Oct 2005 03:23 am
Location: Inverness
Contact:

Re: koni adjustables help?!?!

Post by Ronnie » 22 Feb 2010 12:10 am

There's a Koni leaflet in that big wad of paperwork I gave you - i think I had them set to 3 half turns out of a possible 5 - can't remember how many clicks there are but they're set at a little over half maximum stiffness. So will go quite a bit stiffer! There are holes in the casing to stick a wee phillips screwdriver through and lever out the bump stops if I remember correctly.

http://www.amdtechnik.com/technical.koniadjustment.cfm
http://www.toperformance.com.au/tech_fs.html
'85 360GLT Mk2 3 Door B19E - SOLD
'94 L400 Mitsubishi Delica LWB

http://www.filterfeeder.eu

User avatar
kds19
Posts: 366
Joined: 09 Mar 2008 07:33 pm
Location: aberdeen, Scotland

Re: koni adjustables help?!?!

Post by kds19 » 25 Feb 2010 07:32 pm

cheers ronnie found the leaflet
will give it a shot after the drift day 340pw
85 360 GLT drift beast
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."

Post Reply