I haaave a dream.
-
- Posts: 1415
- Joined: 18 Aug 2009 09:58 pm
- Location: Doncaster UK
Re: I haaave a dream.
I had one of the bolts snap off when I was dismantling the beam on the scrap 360 (not an issue as it's scrap!), made a mental note to do it differently on the Mk1, must remember to apply a bit of heat then and take it easy!
360 GLE Saloon (D 86)
360 GLS (A 84)
343 DL (W 80)
340 GL 1.7 (G 89)
360 GLS (Y 83)
440 Turbo (J 92)
Transit Tipper 125 T350 (02)Alive Again!
Transit Tipper Smiley face Q reg
Mitsubishi Colt 1.1 (54)
R.I.P. 77 343 DL vario
360 GLS (A 84)
343 DL (W 80)
340 GL 1.7 (G 89)
360 GLS (Y 83)
440 Turbo (J 92)
Transit Tipper 125 T350 (02)Alive Again!
Transit Tipper Smiley face Q reg
Mitsubishi Colt 1.1 (54)
R.I.P. 77 343 DL vario
Re: I haaave a dream.
UPDATE
Just picked up the front suspension bits from powder coat.
They do look a little - cleaner.!!
Mac.
Just picked up the front suspension bits from powder coat.
They do look a little - cleaner.!!
Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.
1950 pair of legs that don't work very well.
Re: I haaave a dream.
Hi mac.
I hope this car is going to live in a museum
We have a great museum just outside Belfast called the Folk and Transport museum.
You could send it there and i could go and look at it every week .
Doing a great job.
Cheers Mark.
I hope this car is going to live in a museum
We have a great museum just outside Belfast called the Folk and Transport museum.
You could send it there and i could go and look at it every week .
Doing a great job.
Cheers Mark.
-
- Posts: 1415
- Joined: 18 Aug 2009 09:58 pm
- Location: Doncaster UK
Re: I haaave a dream.
Looks to me like someones going to be producing a show winner here!
360 GLE Saloon (D 86)
360 GLS (A 84)
343 DL (W 80)
340 GL 1.7 (G 89)
360 GLS (Y 83)
440 Turbo (J 92)
Transit Tipper 125 T350 (02)Alive Again!
Transit Tipper Smiley face Q reg
Mitsubishi Colt 1.1 (54)
R.I.P. 77 343 DL vario
360 GLS (A 84)
343 DL (W 80)
340 GL 1.7 (G 89)
360 GLS (Y 83)
440 Turbo (J 92)
Transit Tipper 125 T350 (02)Alive Again!
Transit Tipper Smiley face Q reg
Mitsubishi Colt 1.1 (54)
R.I.P. 77 343 DL vario
-
- *** V3M DONOR ***
- Posts: 9143
- Joined: 11 Nov 2008 04:22 pm
- Location: Newcastle Upon Toon
Re: I haaave a dream.
Hell Driver wrote:Looks to me like someones going to be producing a show winner here!
Re: I haaave a dream.
Mac I don't think there's any chance that won't win best 300 in show next year! The question is will it win overall best in show......there's a challenge
BTW:
BTW:
this....Volvo have been extra secure and as well as making the inserts inside the chassis rail incredibly long to get a good long contact, they also loctited the buggers in!! I snapped two before I realized I was going down the wrong route and got the blowtorch out. Don't need a lot of heat though, just enough to soften the loctite, so unusually you can just heat the bolt directly, rather than the surrounds as you would normally do.volvodspec wrote:the subframe bolts are loctited in AND a bit too long to make the part that comes through the welded inserts corrode, with enough heat from a torch they do come out with normal 1/2 tools just fine though
Re: I haaave a dream.
No pressure at all on me then Andy - I trust OZ is looking after you?
Mac.
Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.
1950 pair of legs that don't work very well.
Re: I haaave a dream.
[threadjack] Yes it is thanks. I'm camped in Cape Leveque, WA at the moment, and then I'll be heading down to Perth. [/threadjack]
Re: I haaave a dream.
Very nice powder coating, am jealous. Have done my back suspension in black resin epoxy 121 and grey underseal (over epoxy 121), diff in silver + black, tank in black, going to leave the front suspension until after all welding.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: I haaave a dream.
UPDATE
Been a little neglectful of late - I plead "life" - however I have aquired for the project a:-
Hella Grille (from Richard of the DOC via a "deal swap" with Macplaxton)
and a 3 door opening rear window "kit" from Stamford via e-bay (thanks for the tip Chris C)
Have been putting a little time in on the engine though - the new "cad" plating is a little bright but I'm sure
it will tone down a bit in use,
more soon - Mac
Been a little neglectful of late - I plead "life" - however I have aquired for the project a:-
Hella Grille (from Richard of the DOC via a "deal swap" with Macplaxton)
and a 3 door opening rear window "kit" from Stamford via e-bay (thanks for the tip Chris C)
Have been putting a little time in on the engine though - the new "cad" plating is a little bright but I'm sure
it will tone down a bit in use,
more soon - Mac
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.
1950 pair of legs that don't work very well.
Re: I haaave a dream.
UPDATE
With life, the forthcoming BKV, family "matters" my boltshop etc. getting in the way of things
I have been somewhat neglecting the "project", but I have squeezed in some time of late.
Sent a spare set of calipers off to "Bigg Red" for refurb. Chose their polymer coating (resistent
to oil, heat, hydaulic fluid, petrol etc,). I have yet to run a tap through the carrier threads but
I must say I'm well pleased with the finish.
I shall have the front suspension, brakes etc. assembled, on the V3M stand at the BKV - as a demo to show off
Robbert Jans, and Dais parts. - so keep yer greasy mitts orf me calipers!
Mac.
With life, the forthcoming BKV, family "matters" my boltshop etc. getting in the way of things
I have been somewhat neglecting the "project", but I have squeezed in some time of late.
Sent a spare set of calipers off to "Bigg Red" for refurb. Chose their polymer coating (resistent
to oil, heat, hydaulic fluid, petrol etc,). I have yet to run a tap through the carrier threads but
I must say I'm well pleased with the finish.
I shall have the front suspension, brakes etc. assembled, on the V3M stand at the BKV - as a demo to show off
Robbert Jans, and Dais parts. - so keep yer greasy mitts orf me calipers!
Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.
1950 pair of legs that don't work very well.
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: I haaave a dream.
Red! You tart!
Re: I haaave a dream.
Very nice, as always! Red callipers? You hooligan!
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
Re: I haaave a dream.
He's only done it to make a point and have -10 BKV points!
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: I haaave a dream.
In total? If we're talking cumulatively, then he must of racked up about -100 now.Chris_C wrote: have -10 BKV points!