my b230fk into a 360 build thread, winter refresh!
Re: my b230fk into a 360 build thread, update?
Suppose i should put a pic up of the car with manual
pics from the weekend
the volvo is at th start of this video for a few seconds, never seen any videos of me, need some proper ones
http://www.youtube.com/watch?v=bzy2z7hOIDI
cheers
pics from the weekend
the volvo is at th start of this video for a few seconds, never seen any videos of me, need some proper ones
http://www.youtube.com/watch?v=bzy2z7hOIDI
cheers
Re: my b230fk into a 360 build thread, update?
Looks like it skids really well now! Yeah, the manual racks are a lot nicer to use than a knackered PAS rack As for videos - I'm back up at the end of the month. No promises but I'll grab some footage if you are on the track. Could even go in for the team comp if you like?
Re: my b230fk into a 360 build thread, update?
BTW dude, you're a brave man for doing all this work on a surface like this! I couldn't stand doing it anywhere other than flat concrete.
Re: my b230fk into a 360 build thread, update?
Yea car drifts well, its my lack of skill and experience that lets it down really, some videos would be great if you can catch me not spinning lol, ive never entered the team comp, abit nervous about spinning and doing some damage to someones car but i think i might man up at the next one so yea.
As for working on the drive its fucking horrible, makes simple things twice as hard, thats why i come on here every now and then and have abit of a cry and a moan
What u drifting at buxton speedy?
As for working on the drive its fucking horrible, makes simple things twice as hard, thats why i come on here every now and then and have abit of a cry and a moan
What u drifting at buxton speedy?
Re: my b230fk into a 360 build thread, update?
abit of tripoding
Re: my b230fk into a 360 build thread, update?
I'll be up at the Driftone weekend 27th and 28th. You're welcome crash into the 940 as much as you lke
Re: my b230fk into a 360 build thread, update?
Now thats a offer you got anotjer 940 sorted then?
Re: my b230fk into a 360 build thread, update?
Yeah. The engine is questionable though. Making quite the knock! It was only £275 though so who's arguing?
Re: my b230fk into a 360 build thread, update?
Ahh abit of knocking is normal lol, if you blow this one up save me the turbo
Re: my b230fk into a 360 build thread, update?
Decide to sort a patch of rust outon the passenger side arch so took the wing off to see what was hiding behind that, after a quick wire brushing by hand it looked like
Then wire brush on the drill and was
A mate came down to give me a hand on the lower patch, forgot to get a
Then i had a go at the
]
As you can see i chopped the overhanging bit of the arch off as it was much easier and this obviously is just a track car, gave it a etch primer and a dust of paint and then a good undersealing/stone
Hopefully ready for some drifting at the weekend
Cheers
Then wire brush on the drill and was
A mate came down to give me a hand on the lower patch, forgot to get a
Then i had a go at the
]
As you can see i chopped the overhanging bit of the arch off as it was much easier and this obviously is just a track car, gave it a etch primer and a dust of paint and then a good undersealing/stone
Hopefully ready for some drifting at the weekend
Cheers
Re: my b230fk into a 360 build thread, update?
Decide to sort a patch of rust outon the passenger side arch so took the wing off to see what was hiding behind that, after a quick wire brushing by hand it looked like
Then wire brush on the drill and was
A mate came down to give me a hand on the lower patch, forgot to get a
Then i had a go at the
]
As you can see i chopped the overhanging bit of the arch off as it was much easier and this obviously is just a track car, gave it a etch primer and a dust of paint and then a good undersealing/stone
Hopefully ready for some drifting at the weekend
Cheers
Then wire brush on the drill and was
A mate came down to give me a hand on the lower patch, forgot to get a
Then i had a go at the
]
As you can see i chopped the overhanging bit of the arch off as it was much easier and this obviously is just a track car, gave it a etch primer and a dust of paint and then a good undersealing/stone
Hopefully ready for some drifting at the weekend
Cheers
Re: my b230fk into a 360 build thread, update?
Broke it again subframe again, it somehow slipped out of were it bolts as its lime a y shaped bit at the front, dont know how though as it was all tight and none of the bolts were loose, i did hit the rumble strips sideways, hopefully the subframe isnt bent but not looked yet,
This time im thinking of putting the sumbframe on and get it all lined up and bolted in and then undo one side at a time were the y shaped bits are and put a washer on and re bolt it and then weld the washer to the subframe so it cant slide out again?
This time im thinking of putting the sumbframe on and get it all lined up and bolted in and then undo one side at a time were the y shaped bits are and put a washer on and re bolt it and then weld the washer to the subframe so it cant slide out again?
Re: my b230fk into a 360 build thread, update?
Hi mate.
Looks like your having a lot of fun there.
Cheers Mark.
Looks like your having a lot of fun there.
Cheers Mark.
Re: my b230fk into a 360 build thread, update?
That's really weird. It shouldn't have slipped out
Re: my b230fk into a 360 build thread, update?
This could be a good idea, dunno how it slipped out though, the radius arm mountings should have held it in place.wiganer31 wrote:This time im thinking of putting the sumbframe on and get it all lined up and bolted in and then undo one side at a time were the y shaped bits are and put a washer on and re bolt it and then weld the washer to the subframe so it cant slide out again?
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4