Custome's "MM Styling" 360
-
- *** V3M DONOR ***
- Posts: 9143
- Joined: 11 Nov 2008 04:22 pm
- Location: Newcastle Upon Toon
Re: Custome's "MM Styling" 360
I love the whole car. The colour of the interior is awesome!
Thanks for sharing dude.
Thanks for sharing dude.
Re: Custome's "MM Styling" 360
Thanks.
I loved to beige interiors and metal paint. 360 have also them.
Today i washed 360 over all. Now it are in garage waiting next project steps!
I loved to beige interiors and metal paint. 360 have also them.
Today i washed 360 over all. Now it are in garage waiting next project steps!
Re: Custome's "MM Styling" 360
would you be interested in making a body kit to sell ? i have wanted to get some side skirts for a long time
Re: Custome's "MM Styling" 360
I not have sideskirt moulds. I have moulds for front and rear spoilers. Yes maybe making is possible when i get time for it. The problem is; i don't know anything how to shipping to other countries.
I started building again. First i drop the driveline to floor. Orginal factory asembled clutch needs change. It are drived 270tkm, distance to rivets are 0.3-0.5mm... Shiftlinkage needs repair, left driveshaft is worn. some
seals needs replace. Finaly i build new exhaust system. Removed parts gets new paint before installation. Maybe i remove also rearaxle, it needs sandplasting and new paint. Also i replace brakehoses.
I started building again. First i drop the driveline to floor. Orginal factory asembled clutch needs change. It are drived 270tkm, distance to rivets are 0.3-0.5mm... Shiftlinkage needs repair, left driveshaft is worn. some
seals needs replace. Finaly i build new exhaust system. Removed parts gets new paint before installation. Maybe i remove also rearaxle, it needs sandplasting and new paint. Also i replace brakehoses.
Re: Custome's "MM Styling" 360
Little cleaning project
All seals is new in differential cover. Hopely oil stays inside now.
All seals is new in differential cover. Hopely oil stays inside now.
Re: Custome's "MM Styling" 360
that looks so good!
What did you use to clean it so well? I just painted my gearbox (bright yellow). I'm having to swap gearboxes again so would love mine to look so clean!
What did you use to clean it so well? I just painted my gearbox (bright yellow). I'm having to swap gearboxes again so would love mine to look so clean!
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
Re: Custome's "MM Styling" 360
First i washed with pressure washer. Second wash by hand with brake cleaner. Most oxidations removed by steelwire brush and kinfe. Then paint.
-
- *** V3M DONOR ***
- Posts: 9143
- Joined: 11 Nov 2008 04:22 pm
- Location: Newcastle Upon Toon
Re: Custome's "MM Styling" 360
Little chassis fixing:
Body is rust protected, chassis parts is sandblasted and painted thick.
Body is rust protected, chassis parts is sandblasted and painted thick.
Re: Custome's "MM Styling" 360
Good condition under there, difference is I had to depanel everything to get to that level.
I have done something similar with the painting, still to do the gearbox and one of the brackets though. Unfortunately only discovered sandblasting after I did the axle, so it may rust through sometime. Will see how it lasts but wil probably keep garaged if possible.
Resin is the best for sealing, but hard to work with seems to take weeks to harden properly in my case, I covered too early with chassis black and then took months to harden, but I've still not used the front suspension parts yet. All my parts are heavily pitted so I may try and collect some nicer items if they are available.
Did you paint the aluminium hubs and change the rear bearings?
I have done something similar with the painting, still to do the gearbox and one of the brackets though. Unfortunately only discovered sandblasting after I did the axle, so it may rust through sometime. Will see how it lasts but wil probably keep garaged if possible.
Resin is the best for sealing, but hard to work with seems to take weeks to harden properly in my case, I covered too early with chassis black and then took months to harden, but I've still not used the front suspension parts yet. All my parts are heavily pitted so I may try and collect some nicer items if they are available.
Did you paint the aluminium hubs and change the rear bearings?
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: Custome's "MM Styling" 360
Looks really good man, love the rear Louvre too.
Re: Custome's "MM Styling" 360
Thanks!
Yes wheelbearing hubs is painted and ready to assembly new bearings. Bearings come from italy maded by breda lorett. How 300 brothers, are that bearings good?
I also change new bracke cylinders and brakehose to rear axle. Brakebads are 2 years ago changed. Front brakes also gets new hoses now.
Also i must do new fueltank collars from stainless steel.
Yes wheelbearing hubs is painted and ready to assembly new bearings. Bearings come from italy maded by breda lorett. How 300 brothers, are that bearings good?
I also change new bracke cylinders and brakehose to rear axle. Brakebads are 2 years ago changed. Front brakes also gets new hoses now.
Also i must do new fueltank collars from stainless steel.
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: Custome's "MM Styling" 360
Looking very good. Nice to see someone going to such detail in a rebuild.
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Re: Custome's "MM Styling" 360
I build new gastank collars from stainless steel.
Re: Custome's "MM Styling" 360
Some assembling done.
Rear axle assemled.
Restored gaspump holder.
Rear axle assemled.
Restored gaspump holder.