volvo 360 glt b230ft

For drift/rally/builds cars projects, engine conversions etc...
Describe your plans, project(s) evolution, works progress and final result!
Post Reply
FA360GLT
Posts: 73
Joined: 01 Nov 2007 06:43 am
Location: santiago,chile

volvo 360 glt b230ft

Post by FA360GLT » 11 May 2015 02:02 am

hello : I will build a motor for my 360 GLT is a b230ft block 740 turbo with a head 1,000,531, my question is can handle orange injectors 850 turbo with the original injection seems to me that a user did, I should be modified to do so, regards
volvo 345 gls 1982 b19a m45 1996-2000
volvo 360 gl 1989 b200k m47 2000-2002
volvo 360 glt 1987 b200e m47 2002-today( future b230ft)
volvo 360 glt 1986 b200e m47- 2015-today donor
volvo 360 glt 1986 b200e m47-2019-today

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: volvo 360 glt b230ft

Post by Ride_on » 12 May 2015 01:44 am

I expect any injectors will work with the right mapping. The standard LH2.4 injectors in the 940 can deliver 200BHP+ with just extra boost. What modifications are you using to increase BHP, what BHP do you expect?
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

FA360GLT
Posts: 73
Joined: 01 Nov 2007 06:43 am
Location: santiago,chile

Re: volvo 360 glt b230ft

Post by FA360GLT » 12 May 2015 04:16 am

I have a full lh2.2 injection system, also could install a further injection or the injection lh2.4 get my 740 turbo , camshaft have a IPD turbo or Unitek 256, the head of a volvo penta 1000531 hope on 200bhp.

I would like to not get my 740 injecting perhaps install an additional injection

Right now my glt has its old b 200 with exhaust 4 to 1 and with 220cc injectors has ported head, is capable of accelerating from 0 to 100 in 8 "9 and reaches 193km / H in 5th A 5500R / min , 740 90 before modifying the 0100 in 9 " 2 and 200KM / H then switched from automatic to manual , a new larger exhaust , larger 335cc injectors boost pressure of 0.75 bar and was installed in 0100 7" 2 and 210km / h hope to achieve more than that in the glt because it is more fun than the 740 turbo

excuse my bad english
volvo 345 gls 1982 b19a m45 1996-2000
volvo 360 gl 1989 b200k m47 2000-2002
volvo 360 glt 1987 b200e m47 2002-today( future b230ft)
volvo 360 glt 1986 b200e m47- 2015-today donor
volvo 360 glt 1986 b200e m47-2019-today

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: volvo 360 glt b230ft

Post by Ride_on » 12 May 2015 07:04 pm

Im not an expert on mods, a stock 940 is plenty for a 360, but I would not worry too much about injectors, 300cc/min is plenty for a 360 unless you want to test the limits of the drive components. Apparently LH2.4 is more adaptive than 2.2. Fuel pressure increase can provide more flow if needed.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

Post Reply