Volvo 350R T5 Engine Track Project U/D 18/02/13

[volvodspec]

offcourse!, but shiny housings look cool:D

and beside that you can quite easaly convert rhd headlights to lhd

[vØlvØfreak]

and beside that you can quite easaly convert rhd headlights to lhd

The reflectors are different, due to the fact of RHD and LHD. How could that be changed easily?

[classicswede]

The glass has a different pattern for the beam.

[SteveP]

The reflectors are also DEFINITELY different, I ended up with a LHD one when I bought some new ones to refurb a set

[Frits]

Really nice work!

[foggyjames]

You know you've been neglecting V3M when you find a months-old thread of epic proportions has passed you by...

Awesome work, as always, bud. In for the updates...

cheers

James

[340GLT]

I told you to look at my thread!!!
hahaha
Adam

[foggyjames]

You did indeed...and I have missed a lot!

cheers

James

[sack]

awsome fab work on the axel! realy like the car too

[340GLT]

Part nos as follows....... Not much progress, got my 360 transaxle setup out of the saloon to start mocking up.
Adam

[volvodspec]

thx Adam !

[340GLT]

Due toweather and other commitments work has been slow on the grey car up until now where it should speed up a fair bit.
Been working on my front brakes the last couple of days.
Adam

[krazvy]

sorry for asking the brake clipers are from what ?

[340GLT]

Mazda Rx7 FD3
Adam

[340GLT]

Well due to other commitments etc time recently on this car has been getting thin. Although i have been having some components made in the background, so i picked them up earlier and spent a bit of time on the car.
Firstly i fitted the longer studs to the front hubs which is dead easy, more of a pain on the back!! The studs are around 30mm longer.
Drilled hubs out to 14mm to accept the impreza studs. Then used a flanged nut and a steel spacer to wind the studs in.
Next i picked up my suspension components!!
The problem with sitting a 300 on its arse on the front with standard rolling diameter wheels is that it ends up being sat on its bump stops with no travel, so my solution is as follows!!!! Test fit tommorow.
Adam