project 360
Re: project 360
Do you still have the stock drumbakes at the rear? If so, you will get problems with locking the rear wheels. But, you still can build in a proportioning valve, so you can adjust brake balans in car.
Re: project 360
now ive been thinking about how the rear drums split cant you just
run a split in the middle of the axle to both sides and just blank of the other out put as that should help
ive yet to play with mine as my grinder has gone up in smoke after 2yrs hard service RIP lol
run a split in the middle of the axle to both sides and just blank of the other out put as that should help
ive yet to play with mine as my grinder has gone up in smoke after 2yrs hard service RIP lol
Re: project 360
well i have now found out that it is my handbrake master cylinder that is buggered as i put a pipe in to replace the handbrake and i instantly had brakes again
i didnt even bleed the system and the foot pedal was as hard as a rock so ill get a wilwood master cylinder from driftworks and see if that works
and today i temporarily sorted the giant hole in my down pipe using a monster energy drink tin, copious amounts of exhaust paste and 3 jubilee clips for good measure lol rough but by god the car is quiet now good enough for me
just waiting for my new ebay spec down pipe to arrive...
i didnt even bleed the system and the foot pedal was as hard as a rock so ill get a wilwood master cylinder from driftworks and see if that works
and today i temporarily sorted the giant hole in my down pipe using a monster energy drink tin, copious amounts of exhaust paste and 3 jubilee clips for good measure lol rough but by god the car is quiet now good enough for me
just waiting for my new ebay spec down pipe to arrive...
85 360 GLT drift beast
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."
Re: project 360
yeah brand new but it was cheap so that probably makes sense
85 360 GLT drift beast
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."
-
- Posts: 1921
- Joined: 06 Dec 2008 09:35 pm
- Location: Netherlands.
- Contact:
Re: project 360
could be just a bit of dirt in it!!!
Re: project 360
shame about MC but new mind
Re: project 360
i think they were just junk as i got sent 2 master cylinders with my handbrake and they both didnt work
ach well mega money driftworks spec it is then
ach well mega money driftworks spec it is then
85 360 GLT drift beast
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."
Re: project 360
im going to use a series 2 land rover clutch master cylinder in theory it should work
theory haha
theory haha
Re: project 360
get the driftworks one i think its only £30 unless you already have the landy one lol
keep me updated with how you get on with it and ill do the same
keep me updated with how you get on with it and ill do the same
85 360 GLT drift beast
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."
Re: project 360
nar i like doing things as cheap as possible my hole budge for one is £30
when i can make something i wont buy it plus the landy one was a tenner brand new
when i can make something i wont buy it plus the landy one was a tenner brand new
Re: project 360
fair enough lol
85 360 GLT drift beast
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."
Re: project 360
got my k cam fitted yesterday and wow the car is awesome to drive!!!!!
had race with my dad last might in his 940 turbo and he couldnt pass me
must have been a power to weight ratio thing or something
but its awesome!!!! k cam ftw!!!!!
best money ever spent and it spins the wheels in the dry no probs now and power is from 3500rpm to over 6k somewhere but i get scared at 6250rpm lol
had race with my dad last might in his 940 turbo and he couldnt pass me
must have been a power to weight ratio thing or something
but its awesome!!!! k cam ftw!!!!!
best money ever spent and it spins the wheels in the dry no probs now and power is from 3500rpm to over 6k somewhere but i get scared at 6250rpm lol
85 360 GLT drift beast
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."
clutch kicks ahoy!!!!
"volvosneverdie wrote: Fred Dibnah was running after me on the scuttling legs of a crab. in a tophat."
-
- *** V3M DONOR ***
- Posts: 9143
- Joined: 11 Nov 2008 04:22 pm
- Location: Newcastle Upon Toon