lowering?
lowering?
ok im going to fit lowering blocks probably 2 inch max on the back but can somebody help me with lowering the front (cheapest way aswell) but no spring cutting!!
cheers theo
cheers theo
C25 ECV-1985-Mk2 340GL-Kessy
A889 VUY-1983-Mk2 360GLS-RUF
A889 VUY-1983-Mk2 360GLS-RUF
volvosneverdie wrote:Vnd says:
diffs, are like pubs and legs.
Best appreciated when open.
I probably should have specified ladies legs in there too. [+=] "embarrarrased emoticon"[].com
Re: lowering?
Classicswede / dai on here does springs for 60 quid IIRC, his catalogue thread is stickied to the top of the offers section. I'm probably going to go for some of his in the new year when i get my lowering blocks put in. Think i'm going 1 inch (got the blocks already) on the back and 2 on the front as the GLT is a bit lower on the back than the others i think
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
Re: lowering?
60 squid each ?
C25 ECV-1985-Mk2 340GL-Kessy
A889 VUY-1983-Mk2 360GLS-RUF
A889 VUY-1983-Mk2 360GLS-RUF
volvosneverdie wrote:Vnd says:
diffs, are like pubs and legs.
Best appreciated when open.
I probably should have specified ladies legs in there too. [+=] "embarrarrased emoticon"[].com
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: lowering?
For a pair of spings £60
lowering block kits are £25 including bolts
lowering block kits are £25 including bolts
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Re: lowering?
After Christmas I'll hopefully purchase some if got the money
C25 ECV-1985-Mk2 340GL-Kessy
A889 VUY-1983-Mk2 360GLS-RUF
A889 VUY-1983-Mk2 360GLS-RUF
volvosneverdie wrote:Vnd says:
diffs, are like pubs and legs.
Best appreciated when open.
I probably should have specified ladies legs in there too. [+=] "embarrarrased emoticon"[].com
Re: lowering?
How much is a 1.4 sports exhaust manifold and s/s system ?
C25 ECV-1985-Mk2 340GL-Kessy
A889 VUY-1983-Mk2 360GLS-RUF
A889 VUY-1983-Mk2 360GLS-RUF
volvosneverdie wrote:Vnd says:
diffs, are like pubs and legs.
Best appreciated when open.
I probably should have specified ladies legs in there too. [+=] "embarrarrased emoticon"[].com
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: lowering?
Exhaust system in SS is £280
Manifolds about the same.
Manifolds about the same.
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Re: lowering?
mr2 springs fit if u can find cheep ones of thoes
-
- Posts: 202
- Joined: 27 Mar 2010 10:46 pm
- Location: Melbourne VIC Australia
Re: lowering?
mr2 springs ?
is there any thing you need to do other then springs?
has any one done it?
and how much lower are stock springs ?
is there any thing you need to do other then springs?
has any one done it?
and how much lower are stock springs ?
Speed has never killed anyone, suddenly becoming stationary... That's what gets you.
-
- Posts: 202
- Joined: 27 Mar 2010 10:46 pm
- Location: Melbourne VIC Australia
Re: lowering?
just wonted to bump this any one know the answer?
Speed has never killed anyone, suddenly becoming stationary... That's what gets you.
-
- *** V3M DONOR ***
- Posts: 9143
- Joined: 11 Nov 2008 04:22 pm
- Location: Newcastle Upon Toon
Re: lowering?
all i know about mr2 springs is they need cutting a lot