Hi. Im going to buy myselfe some alloys after this summer, I have a 360 GLT. Anyone know what size would be best, and what dimension tires would make it look good?

And how do I know what alloys that fits? I know that it has 4 holes, but there seems to be different dimensions on the holes...

pcd is 4x100 , personally I dont think I would fit anything bigger than 15's

I am going to be fitting some 15 by 6 wide wheels with 195/50/15 tyres.
Wheels are the same as 4 stud vauxhall. you will need an ET 40 (ofset) wheel.
Hope this helps

Dai

[quote="classicswede"]I am going to be fitting some 15 by 6 wide wheels with 195/50/15 tyres.
Wheels are the same as 4 stud vauxhall. you will need an ET 40 (ofset) wheel.
Hope this helps

Dai[/quote

Is the offset +40? i've been under the impression its +37(just curious) although new rims are +40. I'd be assuming anything between +30 and +40 wouldnt give too many hassles. Put some 205's on classicswede they do fit.

The 5 spokes I have are ET40 off a 360, I would put on 205 but the 195 are cheaper and its only a 1.7!! Also the car is so low clearance may become an issue.

Dai