Well my calipers are pretty stiff and the brakes were not working too well when I last moved the car. I'm restoring it, so they will be brought up to a good spec.
The Budweg calipers seem pretty cheap at about £50 delivered each, and I could easily spend that with an overhaul kit including a new piston nevermind the work, so it would be nice to get a new set, but are they as good as the originals? Would I be better off overhauling the orginals?
Should also mention I do have some other less corroded spare calipers that might also do, but I would have to clean them up, spray, check rubbers etc.
Knackered calipers
Knackered calipers
Last edited by Ride_on on 24 Apr 2011 12:09 am, edited 1 time in total.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: Knackered calipers
I got a new LH caliper ordered through halfords, £40. Deplhi Lockheed 300 specific one. Been working fine for me. Good price too, no surcharge etc, got it next day.
Speedy88 wrote: Leave choke on, idling obnoxiously until neighbours peer out windows at the noisy exhaust
Give neighbours thumbs up
Rev engine to 7K
Exit street sideways
Win at life.
Re: Knackered calipers
If you do get new's, try to keep the olds incase we ever do have them dry up!
I got some from my local friction shop (Kimber's Friction in Southampton), they didn't work out too expensive from memory, around John's price.
Caliper rebuild kits (along with master cly rebuild kits) have dried up in the UK, too many people were putting the seals on backwards... Poland was the last place I got some shipped from.
I got some from my local friction shop (Kimber's Friction in Southampton), they didn't work out too expensive from memory, around John's price.
Caliper rebuild kits (along with master cly rebuild kits) have dried up in the UK, too many people were putting the seals on backwards... Poland was the last place I got some shipped from.
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
-
- Posts: 1921
- Joined: 06 Dec 2008 09:35 pm
- Location: Netherlands.
- Contact:
Re: Knackered calipers
Dafhobby has them in stock, i've rebuild mine last week, see this page:
http://www.volvo300mania.com/forum-uk/v ... &start=150
ordered them quite a while ago and they weren't more than €15 per kit!
http://www.volvo300mania.com/forum-uk/v ... &start=150
ordered them quite a while ago and they weren't more than €15 per kit!
Re: Knackered calipers
Hi Mate.
I still have my GLT one that were in good working order when i took them of.
Let me know if your stuck.
Cheers Mark.
I still have my GLT one that were in good working order when i took them of.
Let me know if your stuck.
Cheers Mark.