wheel studs and nuts

Front axle, springs, shock absorbers, wheels, bearings, calipers, drums...
Tuning: suspension, discs, alloys upgrade...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
littlemanrob
Posts: 69
Joined: 05 Oct 2010 05:42 pm

wheel studs and nuts

Post by littlemanrob » 28 May 2011 09:58 pm

hello people

does anyone know the size and diamiter of wheel stud and thread size of the nuts

cheers guys

nekto
Posts: 32
Joined: 04 Jul 2007 08:44 am
Location: Russia

Re: wheel studs and nuts

Post by nekto » 29 May 2011 09:16 am

М12х1.25 afaik
'84 360

User avatar
2 Fast 4 U
Posts: 120
Joined: 28 Nov 2007 10:06 pm
Location: Netherlands

Re: wheel studs and nuts

Post by 2 Fast 4 U » 29 May 2011 11:40 am

M12 x 1.25 mm is correct
Image

Understeer: The front of the car hits the wall,
Oversteer: The rear of the car hits the wall,
Horsepower: How fast the car hits the wall,
Torque: How far the car pushes the wall.

User avatar
L14MNP
Posts: 1340
Joined: 26 May 2010 09:15 pm
Location: Sunderland/Durham

Re: wheel studs and nuts

Post by L14MNP » 29 May 2011 09:26 pm

Standard studs are 13mm also iirc. Get the drill out and through them in the bin though. :lol:
STREETO WITHDRAWL
INTO BURNOUTSsince1982

Post Reply