wheel studs?

Front axle, springs, shock absorbers, wheels, bearings, calipers, drums...
Tuning: suspension, discs, alloys upgrade...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
User avatar
ty360volvo
Posts: 202
Joined: 27 Mar 2010 10:46 pm
Location: Melbourne VIC Australia

wheel studs?

Post by ty360volvo » 29 May 2011 01:45 pm

hey has any one looked into changing the wheel studs over to longer ones so as to fit spacers so you can fit wider wheels with different amounts of offset?
Image
Speed has never killed anyone, suddenly becoming stationary... That's what gets you.

User avatar
L14MNP
Posts: 1340
Joined: 26 May 2010 09:15 pm
Location: Sunderland/Durham

Re: wheel studs?

Post by L14MNP » 29 May 2011 09:22 pm

I have some 75mm extended Scooby studs for mine mate. Needs the hubs drilled out to 14mm, and job jobbed. They are the same pitch thread, M12 x 1.25mm (or wtf it is).

This is the best alternative there is. Have a search, it's been done or spoken about before mate.
STREETO WITHDRAWL
INTO BURNOUTSsince1982

User avatar
ty360volvo
Posts: 202
Joined: 27 Mar 2010 10:46 pm
Location: Melbourne VIC Australia

Re: wheel studs?

Post by ty360volvo » 06 Jun 2011 05:49 am

hey does any one know the length of stock 360 glt studs?
Image
Speed has never killed anyone, suddenly becoming stationary... That's what gets you.

Nimminz
Posts: 1669
Joined: 11 Jun 2010 10:56 pm
Location: Durham City, NE England, UK
Contact:

Re: wheel studs?

Post by Nimminz » 06 Jun 2011 10:32 pm

I THINK its 43.5mm overall. I've just replaced two of mine. Got subaru ones that were 63mm long then drilled the hubs 14mm to accomodate the 14.3mm dia. splines. then just cut them down level with the other 2 on the hub
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4

Post Reply