WHAT SIZE BRAKE SPANNER?
WHAT SIZE BRAKE SPANNER?
What size open ended brake spanner will I need to remove the nuts that connect the brake hoses to the master cylinder?
1988 340 1.4 DL
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
-
- Posts: 230
- Joined: 10 Nov 2009 01:54 pm
- Location: Oxford and Worcester
Re: WHAT SIZE BRAKE SPANNER?
It think it is an 11mm from memory.
Re: WHAT SIZE BRAKE SPANNER?
Mine were imperial, the brake fittings on the car are one of the list of things that still are imperial.
As to which imperial...
As to which imperial...
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: WHAT SIZE BRAKE SPANNER?
I would have thought metric, since the DAF 66s were all metric in the brake department, even the UK Lockheed servo and rear brakes (unless someone had been "at it")
Re: WHAT SIZE BRAKE SPANNER?
Fake has had imperial fittings on *all* hard brake lines, I don't run standard flexi's so it's not fair for me to say whats on those. She also had out the factory imperials on seatbelts (natch) as well as obvious things like clutch diameters/splines, drum sizes etc.
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: WHAT SIZE BRAKE SPANNER?
Fair enough, must have had something of a vested interest in flogging imperial fasteners at the main stealers.
Re: WHAT SIZE BRAKE SPANNER?
a dual 10 and 11mm brake spanner should cover most jobs. Plus 14+15mm for the hoses.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: WHAT SIZE BRAKE SPANNER?
Well if it's old money then a 7/16" AF and 9/16" AF would be handy.
Re: WHAT SIZE BRAKE SPANNER?
Just tried a normal spanner on it and its 11mm. Can you use a normal spanner to undo it or is it best to use an actual open ended brake spanner?...
1988 340 1.4 DL
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
Re: WHAT SIZE BRAKE SPANNER?
Depends how stiff, but usually a 2/3 sided hex brake spanner is needed. A normal C spanner tends to bend and round off the corners. If you wreck them, you can use mole grips, but the nut needs replaced.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: WHAT SIZE BRAKE SPANNER?
Thanks, I will get the correct Draper 11mm open ended brake spanner which is £4.65 at my local Kevin Coopers Motor Factors. Its more hassle than necessary to me rounding off the nuts, I'd rather do it correctly...Ride_on wrote:Depends how stiff, but usually a 2/3 sided hex brake spanner is needed. A normal C spanner tends to bend and round off the corners. If you wreck them, you can use mole grips, but the nut needs replaced.
1988 340 1.4 DL
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)