Coilovers?

Front axle, springs, shock absorbers, wheels, bearings, calipers, drums...
Tuning: suspension, discs, alloys upgrade...
NO parts requests here, please use our V3M BUY & SELL corner
User avatar
L14MNP
Posts: 1340
Joined: 26 May 2010 09:15 pm
Location: Sunderland/Durham

Re: Coilovers?

Post by L14MNP » 22 Oct 2012 12:46 am

It's the original strut tube dude. Just band sawed/machined out and then had the uprights welded back up - quite the fuck on.

Got pics of the tube with the bottom welded up and it all sitting pretty - somwhere. :lol:
STREETO WITHDRAWL
INTO BURNOUTSsince1982

Attack2001
Posts: 1015
Joined: 05 Jun 2011 03:45 pm
Location: Rochester, Kent
Contact:

Re: Coilovers?

Post by Attack2001 » 22 Oct 2012 12:50 am

Oh I see, once you'd taken the tube out wasn't it a bit shorter?
Image

User avatar
L14MNP
Posts: 1340
Joined: 26 May 2010 09:15 pm
Location: Sunderland/Durham

Re: Coilovers?

Post by L14MNP » 22 Oct 2012 12:56 am

Yeah, a little. Nothing that can't be overcome with a new plate on the bottom mind.

O/T: Was over the garage again today dude. Got the gearbox hanger dug out for you. the alloy and rubber mounts look fine to me. I thought they were, but always nice to be certain!
STREETO WITHDRAWL
INTO BURNOUTSsince1982

Attack2001
Posts: 1015
Joined: 05 Jun 2011 03:45 pm
Location: Rochester, Kent
Contact:

Re: Coilovers?

Post by Attack2001 » 22 Oct 2012 01:00 am

L14MNP wrote:Yeah, a little. Nothing that can't be overcome with a new plate on the bottom mind.

O/T: Was over the garage again today dude. Got the gearbox hanger dug out for you. the alloy and rubber mounts look fine to me. I thought they were, but always nice to be certain!
Ah ok, sounds like I better get my other coilies made up then :D

Ah that's perfect! The ones on my glt box are pretty knackered :(
Image

cindral
Posts: 84
Joined: 03 Jul 2007 02:06 am
Location: macclesfield

Re: Coilovers?

Post by cindral » 22 Oct 2012 01:52 pm

Anyone keen for a group buy?

Evoman
Posts: 1688
Joined: 15 Sep 2010 10:47 pm
Location: Mid Wales

Re: Coilovers?

Post by Evoman » 22 Oct 2012 05:26 pm

cindral wrote:Anyone keen for a group buy?
Depends how much, but ye, i am reasonably interested
Image

Attack2001
Posts: 1015
Joined: 05 Jun 2011 03:45 pm
Location: Rochester, Kent
Contact:

Re: Coilovers?

Post by Attack2001 » 08 Nov 2012 09:11 pm

Evoman wrote:
Attack2001 wrote:The damper body has been shortened two inches, and the damper rod has been shortened two inches too. This allows you to go lower but still have damper travel. My friend tried to go straight to Gaz a few weeks ago. They refused to sell him any and told him to go through nev.

Thomas...........
Surely this still reduces travel by 2 inchs just like a 2inch drop would? To keep the orginal travel, but still lower it, you'd need to shorten the overall height of the strut or push the strut further into the car?
This does indeed reduce the travel by 2inches as they are shortened for use on 13inch wheels, however they are perfectly good to use with 15inch wheels also. To get original travel but lower the car you'd have to do what i've done and raise the turrets by 2inches.

I spoke to nev today, he informed me that if any of you guys are thinking of getting a set made he can get a group buy together, the more the merrier and the cheaper they'l be. The coilovers are made exchange so you'l have to send him your originals, although he did mention he had a few sets lying around that he could use, and then you'd have to send him your originals once the coilies were on. I have two sets i may be persuaded to part with if enough beer tokens are offered :lol: He uses brand new top mount bearings machined into the top cup, and can shorten the steering arms for more angle if your using them for drifting.

There well worth the money guys, there also damper adjustable over some 30odd clicks so can be turned down for roaduse, and 5 minutes with the bonnet up and your stiff enough for drifting or track use :)

Thanks, Thomas...................
Image

cindral
Posts: 84
Joined: 03 Jul 2007 02:06 am
Location: macclesfield

Re: Coilovers?

Post by cindral » 08 Nov 2012 10:26 pm

I am deffo up for this! Let's get some numbers together and prices!!!!
340pw

Evoman
Posts: 1688
Joined: 15 Sep 2010 10:47 pm
Location: Mid Wales

Re: Coilovers?

Post by Evoman » 08 Nov 2012 11:16 pm

Or you can drop the strut tube further down the hub. 30 clicks? but how wide is that range?
Image

Attack2001
Posts: 1015
Joined: 05 Jun 2011 03:45 pm
Location: Rochester, Kent
Contact:

Re: Coilovers?

Post by Attack2001 » 08 Nov 2012 11:22 pm

Evoman wrote:Or you can drop the strut tube further down the hub. 30 clicks? but how wide is that range?
problem is if you lower the strut tube too far you cover the Speedo drive hole so you have no Speedo.. mines set at about 15 and it's pretty stiff...

Thomas.....
Image

Post Reply