I'm not sure about this, but is it possible to change the bolts one the wheel hub it self to someone that's longer??
i have got some wired rims, which are really thick at the senter, and i'm afraid the nuts won't get enough to grip to. if you guys know what i mean by that..
i haven't measured the original bolts, but i'd like them to be a good 40mm longer. at least. and also at the back.
do any of you know if this is possible??
longer bolt on wheel hub?
longer bolt on wheel hub?
86 360 (344) B200K Blue with 3" slam, daily driver. 8x13 Allycat 175/50
86 360 (344) B200K Blue parts car - Crushed
88 360 (344) B200F Black, Stock - SOLD
86 360 (344) B200K Blue parts car - Crushed
88 360 (344) B200F Black, Stock - SOLD
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: longer bolt on wheel hub?
Search for "Subaru studs" on this forum for teh answers.
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Re: longer bolt on wheel hub?
ah, thanks! didn't realize it was "studs" but now i found a whole lot! thanks Dai!
86 360 (344) B200K Blue with 3" slam, daily driver. 8x13 Allycat 175/50
86 360 (344) B200K Blue parts car - Crushed
88 360 (344) B200F Black, Stock - SOLD
86 360 (344) B200K Blue parts car - Crushed
88 360 (344) B200F Black, Stock - SOLD
Re: longer bolt on wheel hub?
For the rear you will probably need new bearings if you want to change the studs, as the short axle removal damages them. Its doable but tricky.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: longer bolt on wheel hub?
Do you have any pictures to show me? i really don't know how to do this. i'm just learning by doingRide_on wrote:For the rear you will probably need new bearings if you want to change the studs, as the short axle removal damages them. Its doable but tricky.
86 360 (344) B200K Blue with 3" slam, daily driver. 8x13 Allycat 175/50
86 360 (344) B200K Blue parts car - Crushed
88 360 (344) B200F Black, Stock - SOLD
86 360 (344) B200K Blue parts car - Crushed
88 360 (344) B200F Black, Stock - SOLD
Re: longer bolt on wheel hub?
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4