4x100 wheels; just spigot rings needed?

Front axle, springs, shock absorbers, wheels, bearings, calipers, drums...
Tuning: suspension, discs, alloys upgrade...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
Gooly
Posts: 17
Joined: 11 Dec 2012 09:26 am

4x100 wheels; just spigot rings needed?

Post by Gooly » 30 Dec 2012 04:24 pm

Hey guys, quick question;

I understand Volvo 360s have a 4x100 bolt pattern with quite a small centre bore; does that mean any of the huge range of 4x100 wheels (BMW, VX, smaller JDM stuff, VAG, etc...) would fit on it with the right spigot ring adapters? How/where can I get some adapters?

classicswede
*** V3M DONOR ***
Posts: 5461
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Re: 4x100 wheels; just spigot rings needed?

Post by classicswede » 30 Dec 2012 08:01 pm

Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image

User avatar
Speedy88
Posts: 4057
Joined: 04 May 2009 11:52 pm
Location: Bristol

Re: 4x100 wheels; just spigot rings needed?

Post by Speedy88 » 30 Dec 2012 08:14 pm

In the rare case that you find some cool wheels with an even smaller center bore, you'd just need to machine them to get them to fit on the larger bore.

You COULD do what I do and use tapered wheel nuts with tapered wheels whilst using your eye when putting the wheels on, honestly it's never failed me. As long as you don't tighten up one bolt all the way first. That's the beauty of wheel studs over wheel bolts.
'88 340 Williams (Sold)
'85 360 GLS - Drift project (Sold)
'77 Colt Sigma
'96 940 Drift project

wiganer31
Posts: 479
Joined: 14 Feb 2011 03:22 am

Re: 4x100 wheels; just spigot rings needed?

Post by wiganer31 » 02 Jan 2013 06:46 pm

as said yea, ive had a few whels on mine,
vauxhall on the front, mx5 on the rear:
Image
some shitty bmw 15's on rear:
Image

Post Reply