Shortened steering arms for more steering lock

Front axle, springs, shock absorbers, wheels, bearings, calipers, drums...
Tuning: suspension, discs, alloys upgrade...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
rcsammy
Posts: 3
Joined: 01 Mar 2014 07:23 pm

Shortened steering arms for more steering lock

Post by rcsammy » 29 Jul 2014 02:50 pm

I'm wanting to get the steering arms on my hubs welded so I can achieve more steering lock/angle

Can anyone do this or point me in the right direction of someone who could?

Thanks

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: Shortened steering arms for more steering lock

Post by Ride_on » 29 Jul 2014 08:12 pm

I'm no expert but I think welding cast on such a safety critical item is not advised.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

Post Reply