CR-3001 radio- how to remove and service??

Rust problems and repairs, leaky sunroof... Battery, starter, lights, fuses, airco, heating unit, stereo... | Tuning: custom spoilers & bodykits, fiberglass parts...
NO parts requests here, please use our V3M BUY & SELL corner
CBA
Posts: 1071
Joined: 24 Mar 2010 02:14 am

CR-3001 radio- how to remove and service??

Post by CBA » 13 Jul 2011 03:05 pm

Not even trying to remove it without some instruction!!
this dash is spotless :shock:

anyone have the service/removal guidefor the CR3001.. or just an Idea of how to unclip the thing?

URGENT!! --> I have a mixtape and wish to play it :mrgreen:

CBA
Posts: 1071
Joined: 24 Mar 2010 02:14 am

Re: CR-3001 radio- how to remove and service??

Post by CBA » 13 Jul 2011 03:23 pm

actually, a few pics of top bottom and sides of the unit would suffice :)
There was a post about standard fit radios a week or so back that may shed a litle light, but I cant find it - I also cant find anything on the cr3001 on google

User avatar
spike4073
Posts: 225
Joined: 28 Sep 2008 10:50 am
Location: sheffield

Re: CR-3001 radio- how to remove and service??

Post by spike4073 » 13 Jul 2011 03:25 pm

mine had one of these fitted, theres a special tool (looks like a bit of bent metal) you cant remove it without this ... well its possible but likley you will end up cracking/scratching something......
i have still got the tool (yours for price of a pint)

also have origonal instruction manual for this radio which tells you how to remove/refit dont realy know how to show you the instructions tho ( no scanner :( )

maybe someone else on here also has it and can scan it to show you?

User avatar
L14MNP
Posts: 1340
Joined: 26 May 2010 09:15 pm
Location: Sunderland/Durham

Re: CR-3001 radio- how to remove and service??

Post by L14MNP » 13 Jul 2011 03:55 pm

Is this an OE radio? try pulling the knobs off (titter) as I have heard you can release them with a HU removal key (wire/allen keys/butter knives/etc) from there. Or Just stick your fingers in the tape deck and yank it out.

Still feeling like a little bitch? :lol: Try getting a hand up behind it and pushing it out. It will come out with one of these methods. I can't see it putting up much of a fight like a cage around an aftermarket din HU and they aren't bolted in behind the dash like a lot of 90's+ Jap [OMG no mention of JDM y0) stuff. Just have a bit of a look and all shall be revealed.
STREETO WITHDRAWL
INTO BURNOUTSsince1982

macplaxton
Posts: 3283
Joined: 09 Feb 2008 02:29 am

Re: CR-3001 radio- how to remove and service??

Post by macplaxton » 13 Jul 2011 04:07 pm

From memory these decks are also held by a couple of screws either side about 2/3rd of the way back from the front of the unit. They certainly have threaded brackets there for that purpose.
72 DAF 44 Estate 78 Volvo 343DL Black BeautyImageImage
82 Volvo 343DL CVTImageImage 88 Volvo 340DL Diesel

CBA
Posts: 1071
Joined: 24 Mar 2010 02:14 am

Re: CR-3001 radio- how to remove and service??

Post by CBA » 13 Jul 2011 08:04 pm

I managed it, I did take the nuts off the knobs :mrgreen:
its just held by spring clips, no "security" just pull it out.
Fitted a new (butchered from kenwood stereo) drive belt and all is good, didn't damage anything.

Those radios are NOT meant to be rapaired.. had to cut part of the case away to get at the belts.
Working A1 now!

Thanks anyway for the advices sm4

CBA
Posts: 1071
Joined: 24 Mar 2010 02:14 am

Re: CR-3001 radio- how to remove and service??

Post by CBA » 13 Jul 2011 08:05 pm

for future reference the CR 3001 - CR-3001 comes out just by removing the knobs, then the nuts behind them, then just push the easily accessible clips together and pull!

It's a bitch to service though.

macplaxton
Posts: 3283
Joined: 09 Feb 2008 02:29 am

Re: CR-3001 radio- how to remove and service??

Post by macplaxton » 13 Jul 2011 08:57 pm

CBA wrote:Those radios are NOT meant to be rapaired.. had to cut part of the case away to get at the belts.
What, what? I know some sets can be a ball-ache to strip down, but I find cutting the case a rather extreme approach :shock:
72 DAF 44 Estate 78 Volvo 343DL Black BeautyImageImage
82 Volvo 343DL CVTImageImage 88 Volvo 340DL Diesel

CBA
Posts: 1071
Joined: 24 Mar 2010 02:14 am

Re: CR-3001 radio- how to remove and service??

Post by CBA » 13 Jul 2011 09:19 pm

Yes, it is, but the alternative was buying a soldering iron. Only cut through 2 spot welds and 1 screw hole - If and when I get a soldering Iron i'll "weld" it back .

I used a piece of thin steel wire bent into a hook to thread the belt "remotely" through the gap I created between the circuit board and the tape mech - akin to keyhole surgery. pretty proud of it!

CBA
Posts: 1071
Joined: 24 Mar 2010 02:14 am

Re: CR-3001 radio- how to remove and service??

Post by CBA » 14 Jul 2011 08:29 am

its not a precise instrument - though its got fair fidelity and a throbbing 3WRMS or so.. maybe 2 watts at the speakers :twisted:

just had a thought of modding it with some modern internals, just use the original tape and radio but fit a modern amp from 99p faulty 45w x4 cd off ebay... will have to buy an Iron then.

if there's a way to steal the variable cap from LW and wire in a basic FM receiver.. make the LW button say FM or HF/UHF it could be a worthwhile project. RAD!


Still never managed to find original equipment rear speakers.

macplaxton
Posts: 3283
Joined: 09 Feb 2008 02:29 am

Re: CR-3001 radio- how to remove and service??

Post by macplaxton » 14 Jul 2011 06:35 pm

Ah, hacking away at the case is permitted if you don't have a soldering iron. :lol: Certainly a feature of decks for a long time is bending over case tabs and soldering them to pads on the board. sm2

Don't waste your time modding it. If you like OEM (from an original / asthetic / anti-theft point of view), then get a more upmarket Volvo bit of kit. Usually they have some sort of output socket for a separate amp and another sometimes for an equaliser (which is useful to tap into for a 3.5mm input for a MP3 player or similar)

I would have thought the CR-300x models were 6W a channel?
72 DAF 44 Estate 78 Volvo 343DL Black BeautyImageImage
82 Volvo 343DL CVTImageImage 88 Volvo 340DL Diesel

CBA
Posts: 1071
Joined: 24 Mar 2010 02:14 am

Re: CR-3001 radio- how to remove and service??

Post by CBA » 14 Jul 2011 08:54 pm

i'll have to have a look.. for all three reasons - is there a name for this slot type> do any other marques-makes fit/is the slot used in other volvos?

macplaxton
Posts: 3283
Joined: 09 Feb 2008 02:29 am

Re: CR-3001 radio- how to remove and service??

Post by macplaxton » 15 Jul 2011 12:00 am

CBA wrote:is there a name for this slot type
It's V300 from MY 83, and V700. Models to look out for are CR-101 (later called CR-4061) or CR-201 (later called CR-4041)

Here's some 1980s Volvo radio pron.

Image

Just admire the 1980s no-nonsense layout and cutting edge "microprocessor tuning system". It's pretty good for an OEM set (and made by Mitsubishi as were a lot of Volvo radios, bar the odd Alpine and Philips decks)

Later cars would have a DIN slot adapter and a regular DIN E (single DIN) unit (e.g VC-608 or similar)


edit to add: You don't need a soldering iron or a hacksaw to change the belts on those decks either. :wink:
72 DAF 44 Estate 78 Volvo 343DL Black BeautyImageImage
82 Volvo 343DL CVTImageImage 88 Volvo 340DL Diesel

CBA
Posts: 1071
Joined: 24 Mar 2010 02:14 am

Re: CR-3001 radio- how to remove and service??

Post by CBA » 15 Jul 2011 04:18 am

The radio is magnificent
Did they ever do something in this sort of spec but with analogue tuning?

MCHUDD
*** V3M DONOR ***
Posts: 2537
Joined: 18 May 2006 03:43 pm
Location: BELFAST UNITED KINGDOM

Re: CR-3001 radio- how to remove and service??

Post by MCHUDD » 15 Jul 2011 10:07 am

Hi all.
Love this radio thing. I have an origional mk1 radio cassette
that i know longer use. The cassette goes in long ways and you tune it
useing the buttons. It is a great piece of kit.
Cheers Mark. sm4

Post Reply