360 tank strap group buy
360 tank strap group buy
I need to get a new tank strap made up, and wondering if anyone else interested. I have one nearly new one for measurement.
Plan is to use a local metal folder, hopefully they can do spot welding aswell, and then get them hot dip galvanised and powder coated in another location. It would be the same as OE but I may leave out the extra bit for the plastic clip for the handbrake cables as these don't really work that well and just put something in for a tie wrap. Or should I go for full original design?
No idea of costs at this point, the gal+coating could be expensive but will get prices and leave it as an option. I'm hoping to do it for say £20 a unit over batches of 10 or 20.
Anyone interested? ..fully finished spec or does anyone want parts and self assembly/self finishing which could be significantly cheaper. Eg I could just sell the folded end for others to source/cut the main part themselves.
Will try to source new sticky foam aswell.
Alternative ideas? Aluminium? Stainless uncoated? would probably prefer to stick with steel, and not do any re-engineering unless someone else is confident it would be ok.
Anyone in NI can collect, could post en mass to a few on the mainland.
Plan is to use a local metal folder, hopefully they can do spot welding aswell, and then get them hot dip galvanised and powder coated in another location. It would be the same as OE but I may leave out the extra bit for the plastic clip for the handbrake cables as these don't really work that well and just put something in for a tie wrap. Or should I go for full original design?
No idea of costs at this point, the gal+coating could be expensive but will get prices and leave it as an option. I'm hoping to do it for say £20 a unit over batches of 10 or 20.
Anyone interested? ..fully finished spec or does anyone want parts and self assembly/self finishing which could be significantly cheaper. Eg I could just sell the folded end for others to source/cut the main part themselves.
Will try to source new sticky foam aswell.
Alternative ideas? Aluminium? Stainless uncoated? would probably prefer to stick with steel, and not do any re-engineering unless someone else is confident it would be ok.
Anyone in NI can collect, could post en mass to a few on the mainland.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
-
- Posts: 1415
- Joined: 18 Aug 2009 09:58 pm
- Location: Doncaster UK
Re: 360 tank strap group buy
Looks like a good idea, I was just thinking that I might need one if I go for the 360 tank in the 343. I recently got a tank and strap from a GLT in a scrap yard and I have the one off the gold 360 to salvage, but that's pretty rusty already. They are something that will be difficult to get soon. Ready made, galvanised and coated would be good, so it could be an off the shelf part for those who need a quick fix.
360 GLE Saloon (D 86)
360 GLS (A 84)
343 DL (W 80)
340 GL 1.7 (G 89)
360 GLS (Y 83)
440 Turbo (J 92)
Transit Tipper 125 T350 (02)Alive Again!
Transit Tipper Smiley face Q reg
Mitsubishi Colt 1.1 (54)
R.I.P. 77 343 DL vario
360 GLS (A 84)
343 DL (W 80)
340 GL 1.7 (G 89)
360 GLS (Y 83)
440 Turbo (J 92)
Transit Tipper 125 T350 (02)Alive Again!
Transit Tipper Smiley face Q reg
Mitsubishi Colt 1.1 (54)
R.I.P. 77 343 DL vario
Re: 360 tank strap group buy
The breaker I still have had two *very* new ones on it, still had part number stickers from memory. Worth me grabbing to add to your ones to measure up?
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
Re: 360 tank strap group buy
Sounds a good idea, i might be interested. Depends how hard they'd be to make myself, will have a look.
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4
-
- Posts: 1921
- Joined: 06 Dec 2008 09:35 pm
- Location: Netherlands.
- Contact:
Re: 360 tank strap group buy
just my 2 cents;
if we mount airtanks and fueltanks to trucks at my work, some models use steel straps and they are just straight with the bolts welded to them; when strapping the tank in you bend the straps and done; so in other words maybe you don't have to get them pre-bended at all
if we mount airtanks and fueltanks to trucks at my work, some models use steel straps and they are just straight with the bolts welded to them; when strapping the tank in you bend the straps and done; so in other words maybe you don't have to get them pre-bended at all
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: 360 tank strap group buy
Let me have a butchers at the 340 dizzler setup as it's a sort of 360, so I might be interested.
Re: 360 tank strap group buy
I don't think they come pre-bent anyway (except the sloted end). The steel is pretty floppy, its just flat plate mainly.
They could be hand made, but it would not be as good a result.
Chris, more measurements the better we can average, although its not really critical, probably good to confirm more for measurement error. I'll do up a drawing for the build, won't be to ISO std though:)
They could be hand made, but it would not be as good a result.
Chris, more measurements the better we can average, although its not really critical, probably good to confirm more for measurement error. I'll do up a drawing for the build, won't be to ISO std though:)
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
-
- Website Admin
- Posts: 2260
- Joined: 29 Dec 2003 01:33 am
- Location: Country of Duvel beer > Belgium <
- Contact:
Re: 360 tank strap group buy
That's a very interesting project! Any further development since the start of this thread?
Collection: '78 343 Black Beauty, '82 345 GLS, '83 340 DL 2.0, '84 340 DL vario, '88 360 GLT 5d (2x) & 4d (2x), '89 GLT, '91 340 vario
Dad's cars: '87 340 vario, '89 340 vario
Lot of donors cars and parts...
V3M for life!
Dad's cars: '87 340 vario, '89 340 vario
Lot of donors cars and parts...
V3M for life!
Re: 360 tank strap group buy
The supplier wasn't really interested. I only needed one and basically hand made it. I left out the middle bit for the handbrake retainer and just put a small hoop on for a tie wrap.
I did get mild steel strips cut by said supplier and can provide these, they are slightly thicker material than the original but I managed to use it OK.
I did get mild steel strips cut by said supplier and can provide these, they are slightly thicker material than the original but I managed to use it OK.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: 360 tank strap group buy
Cool solution, bro.
1988 340 1.4 GL, 218k, 5 door (Grey Bess). Gone to CBA.
1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue).
1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess).
1989 340 1.7 GL, 108k, 3 door (Red Ness).
More info here!
1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue).
1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess).
1989 340 1.7 GL, 108k, 3 door (Red Ness).
More info here!