Page 1 of 1
Black Decal for windows
Posted: 22 Jan 2012 05:15 am
by kelvingenders
Does anyone know of where I can source some new black decals for the doors. I've just resprayed all of them. any ideas?
Re: Black Decal for windows
Posted: 22 Jan 2012 05:17 am
by kelvingenders
The decals that sit on the frame for all for doors....
Re: Black Decal for windows
Posted: 22 Jan 2012 04:15 pm
by Ride_on
You mean the black chrome window trim? Its pretty specific, and varies according to model/door etc.
I'd like to get some aswell, missing rear saloon window trim, planning to spray. Even if you could cut it to length and put in standard corners, a company would need loads of them (lots of tooling), then there are variations in how they are captured in the rubber, widths etc. Doesn't seem likely.
Re: Black Decal for windows
Posted: 23 Jan 2012 11:25 am
by kelvingenders
No, I mean on the door pillars...where the black vinyl used to be
Re: Black Decal for windows
Posted: 23 Jan 2012 02:34 pm
by Chris_C
I'm interested in these too... Steve... didn't you used to have a set we were going to template?
Re: Black Decal for windows
Posted: 23 Jan 2012 03:12 pm
by trabitom99
I also have a part of a set (the LH side, IIRC it's called a "foil"). If anyone's going to template them, and there are bits missing, let me know ...
Tom
Re: Black Decal for windows
Posted: 23 Jan 2012 03:48 pm
by Chris_C
If someone can take a photo with dimensions, I'll cad up a dxf which most vinyl plotters should be able to work with. Lefty and righty will just be mirrors I assume, so you might have all that's needed Tom.
Re: Black Decal for windows
Posted: 23 Jan 2012 04:20 pm
by SteveP
Chris_C wrote:I'm interested in these too... Steve... didn't you used to have a set we were going to template?
Never managed to source a full set
Re: Black Decal for windows
Posted: 23 Jan 2012 05:32 pm
by Chris_C
Don't need a full set dude... do you have a whole side? Or match up with Tom's to make one.
It's something I *really* want on Fake, in my "GLT's look sexy but I want a decent engine" ness
Re: Black Decal for windows
Posted: 25 Jan 2012 10:40 pm
by SteveP
Chris_C wrote:I want a decent engine
I'll have to check but I'm not sure if I got a side or not in the end. To be honest all you need is a supplier of textured vinyl and you should be able to get it made up
Re: Black Decal for windows
Posted: 26 Jan 2012 10:18 am
by Chris_C
Exactly! I'd be appreciated bud
Re: Black Decal for windows
Posted: 28 Jan 2012 08:10 am
by kelvingenders
Any ideas of where textured vinyl lives?