Page 1 of 1

Driver side seat belt - Dilema

Posted: 13 Feb 2012 11:27 am
by kelvingenders
Hi guys...looking for a supplier or decent second hand drivers side seat belt. Must be for a MK 3 360GLT....colour coded bumpers model .

The reason for this request Mk2 have a different fitting....(unless I'm mistaken). Do the later models 88-91 have the same fitting as the MK3. Does any other car run the same seat belt? As you can image in Australia only a few 360GLT were sold....hence my European quest. Does anyone know of a supplier of decent second hand stock. Would anyone be prepared to transact/sell me one via paypal and send it to my mum's address in Burton-on -Trent , Staffs.

Regards Kelvin - Brisbane :360:

Weather is hot today 29 degrees C today

Re: Driver side seat belt - Dilema

Posted: 13 Feb 2012 11:39 am
by jon-ovlov
I have a MK2, and the seat belts removed. AFAIK they were all the same mounting points etc. If they are the same, and if I can find them, you can have mine. :)

Re: Driver side seat belt - Dilema

Posted: 13 Feb 2012 12:57 pm
by Chris_C
They are few and far between over here now, but we do have "re webbing" places that will use the orig mech and just fit a new belt to it.

Re: Driver side seat belt - Dilema

Posted: 13 Feb 2012 02:04 pm
by macplaxton
pics, pics, pics. :wink:

Re: Driver side seat belt - Dilema

Posted: 16 Feb 2012 11:20 am
by kelvingenders
Just had a look at mine. They are the same as on the picture in section 9.24 (front seat belt inertia real anchor bolt (49.1 A) in the Hayes manual