Window trim removal with pics

Rust problems and repairs, leaky sunroof... Battery, starter, lights, fuses, airco, heating unit, stereo... | Tuning: custom spoilers & bodykits, fiberglass parts...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
kelvingenders
Posts: 463
Joined: 12 Apr 2010 08:40 am

Window trim removal with pics

Post by kelvingenders » 16 Mar 2013 10:38 am

Any Ideas of how to remove door window trim from the 360 GLT without bensifn spraining etc. If anyone had pictures showing this (not haynes) I'd be glad. I'm originally from Burton, so if you know anyone from this part of the world, then you'll know why I need pictures.

Kelvin - Brisvegas

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: Window trim removal with pics

Post by Ride_on » 05 May 2014 03:56 am

Well I was looking for advice on this and found this old post. No answers so I figured it out again, here are the photos.

Start at the top left (looking at driver door), this corner piece has a smaller catch than the rest.
IMG_3417s.JPG
Pop the bottom of first
IMG_3417s.JPG (55.23 KiB) Viewed 3739 times
IMG_3418s.JPG
Then the top
IMG_3418s.JPG (57.63 KiB) Viewed 3739 times
IMG_3419s.JPG
Move the top part down
IMG_3419s.JPG (74.77 KiB) Viewed 3739 times
The rest is achieved by a bit of wiggling and pulling.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

Post Reply