central locking not working help
-
- Posts: 65
- Joined: 09 May 2012 10:46 pm
central locking not working help
Anyone help out with this or any ideas what it can be cheers
Re: central locking not working help
A bit more information usually helps. Is it just 1 door or all of them?
All of them - probably a failed switch unit in the driver door, or possibly broken wires in the door hinge area.
Just one of them - stiff lock mechanism, failed servo (often water damaged)
They are fairly easy to diagnose, but you need to take the door cards off. You should be able to simulate the switch by jamming wires into the driver module plug, just have to figure out which one are the 12V and ground and not short them.
All of them - probably a failed switch unit in the driver door, or possibly broken wires in the door hinge area.
Just one of them - stiff lock mechanism, failed servo (often water damaged)
They are fairly easy to diagnose, but you need to take the door cards off. You should be able to simulate the switch by jamming wires into the driver module plug, just have to figure out which one are the 12V and ground and not short them.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7