Door Seals for a 3 door

Rust problems and repairs, leaky sunroof... Battery, starter, lights, fuses, airco, heating unit, stereo... | Tuning: custom spoilers & bodykits, fiberglass parts...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
ratdog
Posts: 16
Joined: 10 Nov 2010 05:58 pm

Door Seals for a 3 door

Post by ratdog » 25 Sep 2014 09:03 pm

Hello Everyone,

Just a quick one to ask if anyone has had much experience replacing the seals around the door. Mine are looking quite tired and its getting very loud down the motorway. I've had a look at places like www.sealsdirect.co.uk but not sure, there's a lot of choice and the fittings look reasonably specific. Any advice would be really helpful.

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: Door Seals for a 3 door

Post by Ride_on » 04 Oct 2014 01:17 am

I had a look at what was available and its not quite the same as original but should do the trick, but you do need to match up the dimensions sufficiently, so take some measurements of the panel edge and the distance from the panel to the far side of the sealing bubble and compare that to whats available.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

Post Reply