Hi, 1986 340 GL.
I fitted a cassette holder unit many years ago and as I remember, it was just a case of pushing it in to locate it. I now need to remove it to replace it with the twin instrument panel, but it refuses to budge by pulling & levering.Please can someone tell me if I am missing something?
Thank you in anticipation of your kind help.
John.
Cassette Holder Unit Removal/How?
Re: Cassette Holder Unit Removal/How?
I prises mine out with a flat head screw driver very carefully from memory.
Own:
86 360GLT
97 S90
92 960S, Royal
01 Subaru Lancaster 6
96 Volvo 854R
Owned
E90 320 M-sport wagon
S60T -Mazda Familia
850lpt -AU Falcon
855T5 -91, 95, 97 960
940TIC -Mitsi GTO TT
16x 360-Toyota corolla
Toyota corona-R32 Skyline
V70R -V70T5
86 360GLT
97 S90
92 960S, Royal
01 Subaru Lancaster 6
96 Volvo 854R
Owned
E90 320 M-sport wagon
S60T -Mazda Familia
850lpt -AU Falcon
855T5 -91, 95, 97 960
940TIC -Mitsi GTO TT
16x 360-Toyota corolla
Toyota corona-R32 Skyline
V70R -V70T5
Re: Cassette Holder Unit Removal/How?
Thank you for your prompt reply.
I will try again today and report back.
John.
I will try again today and report back.
John.
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: Cassette Holder Unit Removal/How?
Looks like its just clipped in. If you look at the photos here you should be able to see where it is held
http://www.classicswede.co.uk/340___360 ... 01664.aspx
http://www.classicswede.co.uk/340___360 ... 01664.aspx
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Re: Cassette Holder Unit Removal/How?
Thank you "classicswede" very helpful.
I have now been able to remove the unit without damage.As shown in the picture there are two small but very sharp tangs; one on each side half way down, It needs a slim screwdriver to reach in and release the "tangs" grip by pressing inwards on the very outer limb of the "V" shaped tang. the ("V" faces upwards towards you as you press.)
John.
I have now been able to remove the unit without damage.As shown in the picture there are two small but very sharp tangs; one on each side half way down, It needs a slim screwdriver to reach in and release the "tangs" grip by pressing inwards on the very outer limb of the "V" shaped tang. the ("V" faces upwards towards you as you press.)
John.