• I need wiring diagrams

Posted: **08 Dec 2005 10:57 am**

Hey.
I need wiring diagrams to lights.
340 1989r B172K
Somebody could help me?

Posted: **08 Dec 2005 12:21 pm**

which lights?

Posted: **08 Dec 2005 12:47 pm**

Oh, yes sorry.
I need wiring diagrams to headlights.

Posted: **08 Dec 2005 06:18 pm**

Witam krajana

Posted: **08 Dec 2005 09:41 pm**

Hi Wiktor, looking at your avatar, they seem to work just fine

Looks great btw!

Posted: **08 Dec 2005 10:51 pm**

Yes They're OK

But my headlights doesn't work

Now I don't know what to do, swich is OK, relay is OK, I think it could be wiring.

Posted: **08 Dec 2005 11:32 pm**

both relays? There are two for the headlights. Work out which one they are and jump the wires. I'll look up the colours at the weekend if you like.

EDIT: you mean full beam? there's a separate relay for this and also check the screws holding the switch into the brackt on the steering column, these go loose or break giving problems.

Posted: **08 Dec 2005 11:52 pm**

Oh! I thought that there is only one relay.
I'll check other relays.
Thank you for Info.

Posted: **08 Dec 2005 11:59 pm**

You should be able to hear the relay switching for the full beam when you're in the driver's seat. Don't know if this is different for 340's. good luck!

Posted: **10 Dec 2005 12:51 am**

My headlights are working!!!

Thanks Guys for your help! Now I invite on beer

Posted: **10 Dec 2005 12:41 pm**

the full beam on my 360 doesn't work properly. The normal lighting doesn't work either, only the very small lights in the headlights. I've made wiring that goes from battery to the switch to the headlights. as a result of tat the full beam doesn't stay on, I can signal though. Can anyone here help me?