getting rid of my back box + better carb

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
matt~driver
Posts: 38
Joined: 05 Oct 2009 01:38 am

getting rid of my back box + better carb

Post by matt~driver » 23 Sep 2010 10:48 pm

Hi I have a Volvo 360 2.0 I was thinking of getting rid of my back box and having just a pipe there instead but was unsure how loud that would make it don’t want it to loud jus sick of it falling down and its got a bit of a blow. I would all so like to fit a better carb but weber don’t do a direct replacement so was thinking a 34/36 would be a good size and just make an adapter plate to fit

Nimminz
Posts: 1669
Joined: 11 Jun 2010 10:56 pm
Location: Durham City, NE England, UK
Contact:

Re: getting rid of my back box + better carb

Post by Nimminz » 24 Sep 2010 10:13 pm

Its not really loud without the backbox on my 2L injection, not sure if there would be a difference with carb. Its annoying but i've heard louder from 1.1 sax-slo's. Take it off and see, if you don't like it stick it back on. Why does it keep falling down? have you checked all 3 hanging rubbers?
'88 360 +T LSD - sold
'87 760 TDI (D24TIC) - sold
'04 V40 D sport (F9Q, decat, Remapped, launch control)
'89 740 SE (b230ft, 12psi, V-cam, headwork, 'remapped', banded steels)
'86 340 DL 1.4

User avatar
L14MNP
Posts: 1340
Joined: 26 May 2010 09:15 pm
Location: Sunderland/Durham

Re: getting rid of my back box + better carb

Post by L14MNP » 25 Sep 2010 01:51 pm

It will be fine, the exhaust bends 90* at the end of the trans tunnel and then it is pointing straight at the sill. Cut/extend it there, before the next 90* (parallel with sill). As long as you have a centre box it will be quiet enough IMO. Just don't snap the downpipe. Then a 2.0 carb gets really loud lol.
What a laugh though! Like a cross between a lawnmower and a Nascar.
STREETO WITHDRAWL
INTO BURNOUTSsince1982

Post Reply