New Exhaust not fitting
New Exhaust not fitting
Should have noticed this before I spent an hour trying to get if to fit but meh.....will be emailing Klarius this pic later. Where the tailpipe comes out of the box, it comes out too far and therefore catches on the leaf spring.
Old exhaust next to new INCORRECT PART! by pettaw, on Flickr
Old exhaust next to new INCORRECT PART! by pettaw, on Flickr
-
- Posts: 1921
- Joined: 06 Dec 2008 09:35 pm
- Location: Netherlands.
- Contact:
Re: New Exhaust not fitting
the 360 back boxes are different for a hatch and saloon, don't know the precise differences but that might be the reason it won't fit
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: New Exhaust not fitting
Why not change it back to the early system without the silly set up on those late back boxes
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: New Exhaust not fitting
volvodspec wrote:the 360 back boxes are different for a hatch and saloon, don't know the precise differences but that might be the reason it won't fit
I thought the saloon one was just a little longer???
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Re: New Exhaust not fitting
Ahh you've missed the point guys.....Where the tailpipe exits the silencer, it runs alongside the box before moving to the tailpipe. This part is sticking too far out, the Walker one beside it runs in the correct position, tucked further in. The new one is therefore too wide to fit into the space and rubs either on the leaf spring or on the wheel well.
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: New Exhaust not fitting
I see it now, its the positioning of teh pipes in/out of the box are two far apart
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Re: New Exhaust not fitting
The saloon exhaust is only different at the exit pipe, it points out straight rather than angled downwards. The exit pipe is a seperate piece on the OE so the box is standard between hatch and saloon. The saloon and hatch are identical underneath, except the rear valance sits further away from the rear spring mounts.
I have 2 good condition original Volvo 360 exhausts if anyone is interested, various down pipes and so on. Obviously NI postage will be pricey, but maybe a carry over could be arranged.
I have 2 good condition original Volvo 360 exhausts if anyone is interested, various down pipes and so on. Obviously NI postage will be pricey, but maybe a carry over could be arranged.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: New Exhaust not fitting
I have this EXACT same problem, could it be that some are badly made, I tried an earlier backbox but it wouldnt fit, the bore of the earlier one was less than mine and some it wouldnt fit.pettaw wrote:Ahh you've missed the point guys.....Where the tailpipe exits the silencer, it runs alongside the box before moving to the tailpipe. This part is sticking too far out, the Walker one beside it runs in the correct position, tucked further in. The new one is therefore too wide to fit into the space and rubs either on the leaf spring or on the wheel well.