The prop should sit parrel to the car shouldn't it?
Mine at the minute rakes down towards the gear box which is most likely why it ate the prop?
Quick prop question
-
- *** V3M DONOR ***
- Posts: 5461
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: Quick prop question
soun
ds like the rear mounts are saggy, are they still original?
ds like the rear mounts are saggy, are they still original?
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Re: Quick prop question
Can you get a photo?
Could also be if the front engine mounts are too squashed, or the mounting bar is bent, or the suspension crossmenber has been pushed up.
If the mounts are loose/soft/torn the driveshaft and gearbox will want to the twist up like a rope.
Could also be if the front engine mounts are too squashed, or the mounting bar is bent, or the suspension crossmenber has been pushed up.
If the mounts are loose/soft/torn the driveshaft and gearbox will want to the twist up like a rope.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
-
- Posts: 15
- Joined: 13 Dec 2012 07:47 pm
Re: Quick prop question
Dai I just put your engine mounts in so I think the engine had just sat a lot higher than it used to that's all
Just wanted to make sure my new prop went on as flat as it could go
Just wanted to make sure my new prop went on as flat as it could go