I recently replaced my old (broken) idle-solenoid with a secondhand one. My old solenoid pictured below had a much thinner washer on it than the replacement one.
For some reason the washer on the replacement one was much thicker and had a slight recess in it to house a small rubber washer.
I put the original "thinner" washer onto the replacement solenoid as I figured that my car ran ok before my original solenoid packed up with the thinner washer in place so that must be the way its set-up?
It seems to me that having a thicker washer on the solenoid would stop it sitting so deep inside the carb?
WASHER ON IDLE-SOLENOID?
WASHER ON IDLE-SOLENOID?
Last edited by Justin on 13 Feb 2013 05:31 pm, edited 2 times in total.
1988 340 1.4 DL
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
Re: WASHER ON IDLE-SOLENOID?
Hello, take a look:
https://www.sucarb.co.uk/ProductDetail.aspx?Id=31221
Some years ago i owned a Oltcit Club, a romanian version of Citroen Axel and that solenoid looks very fammiliar to me.
https://www.sucarb.co.uk/ProductDetail.aspx?Id=31221
Some years ago i owned a Oltcit Club, a romanian version of Citroen Axel and that solenoid looks very fammiliar to me.
the early bird gets the worm
`87 B200E on LPG grey GLT aka Time Machine
`87 B200E on LPG grey GLT aka Time Machine
Re: WASHER ON IDLE-SOLENOID?
Both my original solenoid and the secondhand replacement one came off a 340...
1988 340 1.4 DL
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
-
- Posts: 1921
- Joined: 06 Dec 2008 09:35 pm
- Location: Netherlands.
- Contact:
Re: WASHER ON IDLE-SOLENOID?
you need both, you should have: solenoid>thin washer>washer with recess> O-ring and that screws into the carb.
the recessed ring is to make sure the O-ring stays in the correct place to seal the port in the carb
the recessed ring is to make sure the O-ring stays in the correct place to seal the port in the carb
Re: WASHER ON IDLE-SOLENOID?
Thanks, this is very valuable information indeed. My current solenoid has just the thin washer and then a rubber washer; my car seems to be running fine and was tuned perfectly by ear by a friend of mine who used to work for my main Volvo dealership back in the 80's. He wasnt sure of the washer set-up either.volvodspec wrote:you need both, you should have: solenoid>thin washer>washer with recess> O-ring and that screws into the carb.
the recessed ring is to make sure the O-ring stays in the correct place to seal the port in the carb
I guess if I set it up as you've described it'll affect the carbs current tuning? Also, when you say washer with recess do you mean the thicker washer that the rubber ring sits inside? Im guessing the o-ring needs to be placed/positioned inside the washer with a recess?
My cars running like a dream with its current set-up and Im worried that if I do what you've suggested it'll seriously throw the tuning out; What will happen if I carry on driving my car as it is?
1988 340 1.4 DL
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)
(I suffer with O.C.D. which makes me obsessed with fine detail)
(Diagrams or photos are far more helpful to me when it comes to cars)