340 1.7 carb dont work!

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Busicrx
Posts: 41
Joined: 24 Feb 2013 12:25 am

Re: 340 1.7 carb dont work!

Post by Busicrx » 16 Apr 2013 03:02 pm

Jejejeje only 10 days? To me seemed a life!!! :lol:

Busicrx
Posts: 41
Joined: 24 Feb 2013 12:25 am

Re: 340 1.7 carb dont work!

Post by Busicrx » 17 Apr 2013 11:34 pm

Pfff other problem! I lost the screw that fix the green block new ruber gasket to the carb. It is important? If i dont put this screw? Thanks

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Re: 340 1.7 carb dont work!

Post by mac » 18 Apr 2013 09:18 am

No - as long as block and rubber shim are in correct position when bolting carb down.

Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

Busicrx
Posts: 41
Joined: 24 Feb 2013 12:25 am

Re: 340 1.7 carb dont work!

Post by Busicrx » 20 Apr 2013 01:39 pm

Mac, you know where i need to conect the econometer tube?? Thanks

User avatar
mac
Posts: 1403
Joined: 19 Apr 2006 11:02 am
Location: Needham Market U.K.

Re: 340 1.7 carb dont work!

Post by mac » 20 Apr 2013 03:07 pm

Any source of manifold vacuum will do - I would suggest a "T" piece into the crankcase breather line to the large take off on the green block (the one you transfer over from the OE black block). You'll need a T with the appropriate sized pipe stubs but shouldn't be hard to find. You could also T into the line to the brake servo.

Mac.
88 5door Redline 1.7 52k - 19 XC60 Momentum Pro D4 AWD 17k
1950 pair of legs that don't work very well.

Busicrx
Posts: 41
Joined: 24 Feb 2013 12:25 am

Re: 340 1.7 carb dont work!

Post by Busicrx » 20 Apr 2013 09:59 pm

Ok thanks!! I take the T from the car that i take all jejeje. (I live near a "place were are a lot of crashed cars" www.desguaceslatorre.es ) i think in the brake servo is good! Thanks.
Other thing, the green blocks weaks?? And what glue i need to use to the take off that i need to change from OE to green block, cause he dont fit so tightly. Thankthankss!

Busicrx
Posts: 41
Joined: 24 Feb 2013 12:25 am

Re: 340 1.7 carb dont work!

Post by Busicrx » 21 Apr 2013 09:28 am

Mountingggg
Attachments
image.jpg
image.jpg

Busicrx
Posts: 41
Joined: 24 Feb 2013 12:25 am

Re: 340 1.7 carb dont work!

Post by Busicrx » 22 Apr 2013 07:30 pm

Yyyeeaaah!! All mounted!.. How many turns to adjust the "CO" screw in a aprox. "standart" position, ahh i have a k&n replacement filter.
Thanks!

Post Reply